Owner manual

INSTALLATION MANUAL • 22.
ERROR CODES
Error
Code
Error Call Out in Display Description of Error Possible Cause
E34
Steam Generator Drain

Water level in steam
generator does not drop
during cleaning program

drain pump.

water level probes.
— Generator drain pump is faulty.

— No output to pump from relay board.
E36
 Oven cavity temperature is

a steam mode or cleaning
program

— Low water pressure.
— Wiring or connection issue.
— Water injection pipe obstructed.


— No output to solenoid valve form relay board.
E51
No Water In Boiler Water inside steam generator

level

— Low water pressure.
— Generator drain cap missing or loose.
— Generator drain pump is not sealing.
— Generator drain pump elbow leaking.


— Wiring or connection issue.
— No output to dual solenoid from relay board.
E53

Temperature
 

— See Motor Control Error Code list.



E54

Temperature
 

— See Motor Control Error Code list.



E55
Vent Not Open Browning valve does not open — Alignment issue between motor cam and vent



— Wiring or connection problem.
continued on next page
CONTROL ERROR CODES