User Manual
Lighting
BRINGING IMAGINATION TO LIGHT
Lighting
BRINGING IMAGINATION TO LIGHT
ManualOPERATION
Spectra Series
57 Alexander St., Yonkers, NY 10701 Tel: 914-476-7987 Visit our website at www.altmanlighting.com
© 2012 Altman Stage Lighting, Inc.
12
SLAVE MASTER
MASTER and SLAVE modes refer to the origin of the control signal the xture is listening to.
SLAVE
• Putting the switch in the “Slave” position means the xture is listening to the incoming DMX signal.
• Also considered “Normal” operation.
MASTER
• Putting the switch in the Master position means the xture is NO LONGER listening to the incoming DMX
signal and has now become the source of DMX control information for all xture coming after it. The
Master xture will broadcast the pre-built show included in the xtures software that has been selected
by the user. All xtures coming after the Master xture should be set to Slave to receive the DMX signal
originated from the Master xture. This feature allows for rudimentary color changing capability without
the need of an outside DMX control device.
• Also considered Stand-alone operation.
Spectra Strip Operation