User Manual

Lighting
BRINGING IMAGINATION TO LIGHT
Lighting
BRINGING IMAGINATION TO LIGHT
ManualOPERATION
Spectra Series
57 Alexander St., Yonkers, NY 10701 Tel: [phone] Visit our website at www.altmanlighting.com
© 2012 Altman Stage Lighting, Inc.
11
MASTER MODE ( Di erent than the Master Channel described on page 7.)
Master Mode only works while in STAND-ALONE EFFECTS MODE (see page 8). It causes the unit that is
set to Master Mode to behave like a console and Transmit 4-channel (RGBA) 8-bit DMX set on address 001,
re ecting its present light output.
Note: Only the  rst unit that is going to serve as the MASTER  xture should be set to Stand-alone E ects
mode with Master Mode on. Stand-alone E ects Mode with Master Mode on should also not be used while
units are connected to a DMX console. All  xtures following the Master  xture should be set with the Master
Mode OFF, for Normal Operation.
To Turn on MASTER MODE:
To Turn o the MASTER MODE:
1. Place  xture in Stand-alone Mode (see page 8)
2. Wait a few seconds until the display goes blank
3. Press and hold the [ HUNDREDS ] button
4. Press and hold the [ ONES ] button
5. Release the [ HUNDREDS ] button
6. Release the [ ONES ] button
7. Display will show ON for a moment to indicate new setting and then blink.
8. Address remaining  xtures connected to the MASTER  xture to DMX address 001
Wait a few seconds until the display goes blank
Press and hold the [ HUNDREDS ] button
Press and hold the [ ONES ] button
Release the [ HUNDREDS ] button
Release the [ ONES ] button
Display will show OFF for a moment to indicate new setting and then blink.