User's Manual
Table Of Contents
- Altiostar Networks iRM4451nn00-2 intelligent Remote Radio Head
- Preface
- Contents
- List of tables
- List of figures
- 1 Introduction
- 2 Safety requirements
- 3 Physical description
- 4 Installation prerequisites
- 5 Installation overview
- 6 Installing the iRM4451nn00-2
- 6.1 Assembling cables
- 6.2 Routing pre-assembled power/GigE optical fronthaul/grounding cables
- 6.3 Installing the mounting bracket
- 6.4 Hoisting the iRM4451nn00-2 on elevated structures
- 6.5 Installing the iRM4451nn00-2 on the mounting bracket
- 6.6 Connecting the grounding cable
- 6.7 Connecting the RET cables
- 6.8 Connecting the GigE optical fronthaul cables
- 6.9 Connecting the RF cables
- 6.10 Connecting the alarms cable
- 6.11 Connecting the –48 V dc power cable
- 6.12 Weatherproofing cable connections
- 6.13 Checking power
- 7 Terms, Acronyms and Abbreviations
Installation overview
5-2 iRM4451nn00-2 iRRH Product Description and Installation Guide
To unpack the shipping container:
1. Verify no shipping damage to box.
NOTE
It is important to report damage or material shortages to the shipping carrier
while a representative is on site. If concealed damage or material shortages are
found at a later time, contact the shipper to make arrangements for inspection
and claim filing.
2. Remove packing materials.
NOTE
The shipping materials can be recycled. In some regions or countries it is
mandatory that packing materials be recycled or re-purposed. Please dispose of
shipping material accordingly.
3. Remove equipment from packing material and inspect equipment for shipping
damage or missing items.
NOTE
If concealed damage or material shortages are found at a later time, contact the
shipper to make arrangements for inspection and claim filing.
5.3 Verifying all parts received
Verify all parts listed in the accessory list in Table 5-5 were received.
Assisted carry ONLY! This object is heavy; over 75 lb. (34.0
kg). Follow instructions when lifting unit from shipping container
and hoisting onto mounting bracket. Requires a minimum of two
people to lift and hand carry the unit.