User's Manual
Table Of Contents
- Altiostar Networks iRM4451nn00-2 intelligent Remote Radio Head
- Preface
- Contents
- List of tables
- List of figures
- 1 Introduction
- 2 Safety requirements
- 3 Physical description
- 4 Installation prerequisites
- 5 Installation overview
- 6 Installing the iRM4451nn00-2
- 6.1 Assembling cables
- 6.2 Routing pre-assembled power/GigE optical fronthaul/grounding cables
- 6.3 Installing the mounting bracket
- 6.4 Hoisting the iRM4451nn00-2 on elevated structures
- 6.5 Installing the iRM4451nn00-2 on the mounting bracket
- 6.6 Connecting the grounding cable
- 6.7 Connecting the RET cables
- 6.8 Connecting the GigE optical fronthaul cables
- 6.9 Connecting the RF cables
- 6.10 Connecting the alarms cable
- 6.11 Connecting the –48 V dc power cable
- 6.12 Weatherproofing cable connections
- 6.13 Checking power
- 7 Terms, Acronyms and Abbreviations
Installation prerequisites
4-6 iRM4451nn00-2 iRRH Product Description and Installation Guide
4.5 Site installation checklist
Verify site conditions required for the installation of the iRRH are known. In addition,
the site must be prepared by the Installer in accordance with the Site Installation
Guide provided by the Operator which must include, at a minimum, the required tasks
in Table 4-4. The Installer or his representative should initial and date the Check box
as each item is completed.
Table 4-4 Site installation checklist
Item Site installation checklist Check
1 Verify Site Installation Plan and installation documentation is available.
2
Verify health and safety documentation specified by the Operator and
Altiostar Networks are understood and installation personnel are trained
accordingly.
3
Know locations of fire equipment, eyewash stations, and evacuation
procedures posted for fire/halon discharge.
4
Know locations of first aid and emergency equipment and installation
personnel are familiar with their operation and use.
5
Verify site authorizations, clearances, and releases from Operator and local
authorities are complete.
6
Verify emergency telephone numbers are posted for fire, police, and
ambulance/medical aid.
7
Verify Operator or his representative(s), the Installer, and local authorities
contact and phone numbers are posted.
8 Verify installation schedule is approved.
9
Wear approved protective equipment such as hard hats, safety glasses,
gloves, etc. when needed.
10
Verify pre-installation work specified in the Site Installation Plan is
complete.
11
Verify the installation location of the iRRH meets the mounting requirements
indicated in this document.
12
Verify all required tools required for lifting the iRRH onto structure, and for
installation, are available.
13
Verify all ordered hardware, including that not provided as part of the
Altiostar Networks intelligent eNodeB solution, is available and on site.
14
Verify that the Operator or his representative(s), the Installer,
Altiostar Networks, and all other affected parties are in agreement
with the equipment installation location, power source, and
grounding location, to meet the installation checklist requirements.