Installation Guide
Table Of Contents
- Preface
- Contents
- 1 Introduction
- 2 Safety requirements
- 3 Physical description
- 4 Installation prerequisites
- 6 Installing the iRM4451
- 6.1 Assembling cables
- 6.2 Routing pre-assembled power/GigE optical fronthaul/grounding cables
- 6.3 Installing the iRM4451 mounting bracket
- 6.4 Hoisting the iRM4451 on elevated structures
- 6.5 Installing the iRM4451 on the mounting bracket
- 6.6 Connecting the grounding cable
- 6.1 Connecting the RET cables
- 6.1 Connecting the GigE optical fronthaul cables
- 6.1 Connecting the –48 V dc power cable
- 6.2 Checking power
- 6.3 Installing the solar shield
- 7 Terms, Acronyms and Abbreviations
- 5 iRM4451 installation overview
iRM4451 installation overview
iRM4451 RRH Product Description and Installation Guide 5-3
1 350-00-0009 Kit, accessory, grounding cable lug & nuts
1 350-00-0007 Kit, mounting hardware & screws
2 460-00-0014 Screw, M4-0.7 × 12 mm, cross-head pan, SEMS, SS
2 460-00-0020 Screw stud, M12-1.75 × 168 mm, SS
4 495-00-0001 Washer, flat, M12, max. 24 mm OD, SS
4 495-00-0002 Washer, split, M12, max. 24 mm OD, SS
4 445-00-0003 Nut, M12-1.75, SS
1 440-00-0033
Dual-hole grounding lug, #6 AWG, 90 degree, 10 mm
bolt spacing, 24 mm length
460-00-0017
Screw, crosshead pan, M5-0.8 × 10 mm, split/plain
washer, SEMS, SS
1 430-00-00xx Solar shield
3+1 460-00-0017
Screw, sun shield mounting, M5-0.8 × 10 mm, crosshead pan, split/
plain washer, SEMS, SS
Standard equipment shipped pre-installed
1 420-00-0030 Mounting plate
Operator-acquired parts for pre-installation requirements
1 360-00-0119 DC cable assy., Tyco TE CPC Series connector, PN 788188-1
1
As specified per site
requirement
Power cable, 8 AWG min. (Alpha Wire PN 460819 or equiv.) (Operator
ordered to length according to site requirements)
1
Huber + Suhner
09H02FG0-50-XA/88-
2-L-NN
Gigabit optical Ethernet FTTA, Q-XC0 feeder to LC duplex fronthaul
cable, 5.5 mm dia., NN=length in meters according to site requirement
2
(min)
McMaster 3040T13T
or equiv.)
Eyebolt, M8x1.25, 16 mm, SS (A third eyebolt can be used for control
line attachment)
Table 5-9 iRM4451 parts list
Qty Part number Part description