User`s guide

INTERFACES
3
void the user’s authority to operate the
equipment.
ABOUT YOUR INTERFACE 2
There are several varieties of computers and
computer video cards on the market today. There
are also numerous data monitors and large screen
data projectors. When displaying a computer
image on a large screen data projector or on a
large screen monitor, it often becomes clear that
some computers are not always compatible with
certain display devices. The MX2100AV is a
computer video interface designed to resolve this
incompatibility.
The MX2100AV is a dual input-switchable
computer video interface. It is designed to interface
up to two VGA/SVGA/XGA/UXGA/MAC/SUN or
SGI computer video sources to two scan-rate
compatible presentation monitors or data
projectors. Each of the inputs can be connected to
different types of computers simultaneously.
The MX2100AV is a state-of-the-art piece of
equipment with an exceptional combination of
advanced features and very competitive pricing.
TECHNICAL SPECIFICATIONS 3
FEATURES/
DESCRIPTION
MX2100AV
GENERAL
Inputs
Stereo Audio
Input Connector
Two, 3.5 mm stereo
jacks
Computer Video
Input Connector
Two, 15pin HD-F
Outputs
Video Output Connectors Two, 15-pin HD-F
Audio Loop Output One, 3.5mm stereo jack
Audio Output Connector
One, 5-position terminal
block
Compatibility
Stereo or mono
unbalanced audio;
VGA/SVGA/XGA/UXGA
Compatible Signals,
Apple/MACII/Quadra/G3
Signals, Sun/SGI
Workstations
Table 1. MX2100AV General
MECHANICAL MX2100AV
Enclosure 1 U High, ½ Rack Wide
Width 8.50 in (216mm)
Height 1.75 in (44mm)
Depth 4.93 in. (125mm)
Weight 2.0 lb. (0.91kg)
Ship Weight 2.8 lb. (1.27kg)
Material 0.1" Aluminum
Finish Gray
Faceplate Lexan
T° Operating 10°C-35°C
T° Maximum 50°C
Humidity Technical
90% non-condensing
MTBF (calculations) 40,000 hrs
Table 2. MX2100AV Mechanical
ELECTRICAL MX2100AV
Input Video Signals
Analog Signal 0.3 to 1.2 Volt p-p
Impedance 75 Ohms
Input Sync Signals
Horizontal, Vertical, & C-Sync TTL(+/-)
Sync on Green -0.3V
Impedance 10 k Ohms
Audio Input Signals