User`s guide

MULTI-TASKER™
400-0394-004
18
2: BRIGHTNESS (24)
1: +
2: -
ESC: GO BACK
3: CONTRAST (40)
1: +
2: -
ESC: GO BACK
4: COLOR (24)
1: +
2: -
ESC: GO BACK
5: SHARPNESS (10)
1: +
2: -
ESC: GO BACK
6: HUE (0)
1: +
2: -
ESC: GO BACK
7: ASPECT RATIO (4:3)
1: 16:9
8: 3D COMB FILTER (ON)
1: OFF
9: NOISE REDUCTION (ON)
1: OFF
A: FREEZE (OFF)
1: ON
ESC: GO BACK
3. VERSION
Returns card number and firmware version.
4. STATUS
Returns the card status.
5. HELP
Displays a list of commands for the
MT106-103 along with a brief description.
6. ESC
Returns to the parent menu.
7.4.5 MENU MODE EXAMPLES
1. Change Output Resolution
An MT106-103 is in slot 5. Change the output
resolution to 1280x1024. Start by clicking the
mouse in the Terminal window. Follow the
keystrokes below:
Enter List available cards
05 Select MT106-103 in slot 5
2 Select Setup Menu
1 Select Output Resolution
5 Select 1280x1024 resolution
ESC Return to Setup Menu
ESC Return to the Main Menu
2. Adjust Brightness
Increase the brightness on the output of the
MT106-103 in slot 5. Starting from the
MT106-103's Main Menu, follow the keystrokes
below:
2 Select Setup Menu
2 Select Brightness
1 Increment Brightness one step
1 Increment Brightness again
ESC Return to Setup Menu
ESC Return to the Main Menu
3. Display Card Status
Display the status of the MT106-103 in slot 5.
Starting from the MT106-103's Main Menu,
follow the keystrokes below:
4 Displays card status
NOTE: In this case, the Main Menu is still
active and will redisplayed after the
status is displayed.