Specifications

MULTITASKER
™
10
10
Command Format: [OSImCi]
m = offset value from 0 to 128
Ci = card ID number (i = number from 4 to 19)
Example:
[OSI128C16] sets the input offset value to 128
for the card in slot #16.
7.3.8. [OSO]
This command sets the output offset value.
Command Format: [OSOnCi]
n = offset value from 0 to 128
Ci = card ID number (i = number from 4 to 19)
Example:
[OSO128C16] sets the output offset value to
128 for the card in slot #16.
7.3.9. [SEL]
Select input to adjust gain with +/- commands.
This command allows you to program front
panels on the MultiTasker™ to control the gain
of each channel.
m = input number from 1 to 16
Ci = card ID number (i = number from 4 to 19)
[+] to increase volume for selected input
[–] to decrease volume for selected input
7.3.10. [VOL]
This command allows you to set absolute gain
of each channel.
Command Format: [VOLmAnCi]
m = input number from 1 to 16
An = Absolute value number from 0 to 16
Ci = card ID number (i = number from 4 to 19)
7.3.11. [MAT]
This command allows changes in the
configuration of the matrix. User can configure
the MT110-104 Matrix Switcher as 16x16, 8x8,
4x4 or 2x2
Command Format: [MATmXnCi]
mXn = matrix size: 16X16, 8X8, 4X4 or 2X2
Ci = card ID number (i = number from 4 to 19)
16x16
Input Output
O9 O1 O1 O9
O10 O2 O2 O10
O11 O3 O3 O11
O12 O4 O4 O12
O13 O5 O5 O13
O14 O6 O6 O14
O15 O7 O7 O15
O16 O8 O8 O16
8x8
Input Output
O5a O1a O1a O5a
O5b O1b O1b O5b
O6a O2a O2a O6a
O6b O2b O2b O6b
O7a O3a O3a O7a
O7b O3b O3b O7b
O8a O4a O4a O8a
O8b O4b O4b O8b