MULTITASKER™ MANUAL PART NUMBER: 400-0347-001 MT110-104 16 X 16 BALANCED STEREO AUDIO MATRIX SWITCHER CARD FOR MULTITASKER™
MULTITASKER™ TABLE OF CONTENTS Page PRECAUTIONS / SAFETY WARNINGS ...............1 GENERAL ..........................................................2 INSTALLATION..................................................2 CLEANING.........................................................2 FCC / CE NOTICE..............................................2 ABOUT YOUR MT110-104....................................3 TECHNICAL SPECIFICATIONS............................3 FRONT PANEL DIAGRAM OF MT110-104...........
MULTITASKER™ PRECAUTIONS / SAFETY WARNINGS • 1 Please read this manual carefully before using your MT110-104. Keep this manual handy for future reference. These safety instructions are to ensure the long life of your MT110-104 and to prevent fire and shock hazard. Please read them carefully and heed all warnings. 1.1. GENERAL • Qualified ALTINEX service personnel, or their authorized representatives must perform all service. 1.2.
MULTITASKER™ ABOUT YOUR MT110-104 2 TECHNICAL SPECIFICATIONS 3 NOTE: Specifications are subject to change. See www.altinex.com for up-to-date information. FEATURES/DESCRIPTION GENERAL Inputs (16) 5-pin Terminal Input Connectors Blocks Outputs (16) 5-pin Terminal Output Connectors Blocks Stereo Audio Compatibility Table 1.
MULTITASKER™ 4 4
MULTITASKER™ FRONT PANEL DIAGRAM OF MT110-104 4 TOP RETAINER SCREWS BOTTOM RETAINER SCREWS 16 BALANCED STEREO INPUTS 16 BALANCED STEREO OUTPUTS 5 5
MULTITASKER™ APPLICATION DIAGRAM 5 APPLICATION EXAMPLE: AMPLIFIERS / SPEAKERS STEREO CONNECTS TO INPUTS 9-16 CONNECTS TO INPUTS 1-8 6 6
MULTITASKER™ BLOCK DIAGRAM: TERMINAL BLOCKS IN 1 OUTPUT ON/OFF CONTROL + _ + IN 2 _ + IN 3 _ + IN 4 _ + IN 5 _ + IN 6 _ + IN 7 _ + IN 8 _ + IN 9 _ + IN 10 _ + IN 11 _ + IN 12 _ + IN 13 _ + IN 14 _ + IN 15 _ + IN 16 _ + S/W _ GAIN _ GAIN GAIN OUT 1 + S/W S/W TERMINAL BLOCKS MATRIX SWITCHER S/W + _ OUT 3 + _ GAIN OUT 2 OUT 4 + S/W _ GAIN OUT 5 + S/W _ GAIN OUT 6 + S/W _ GAIN OUT 7 + S/W _ GAIN OUT 8 + S/W _ GAIN OUT 9 + S/W _ GAIN
MULTITASKER™ INSTALLING YOUR MT110-104 6 7.3. DESCRIPTION OF COMMANDS Step 1. Slide the MT110-104 into an available slot in the MultiTasker™ enclosure in order to connect to the bus. Make sure that the MT110-104 card fits into place. Secure the card to the MultiTasker™ by tightening the retainer screws located on the top and bottom of the MT110-104 card. Each command consists of three parts: function, card ID, and an optional unit ID.
MULTITASKER™ On = connect to output n (n = from 1 to 16) Example: Ci = card ID (i = a slot number from 4 to 19) If one MT110-104 card is in slot #8 with outputs 1, 2 & 3 ON: Example: When sending command [C8], feedback will be returned as: To connect input 4 to output 2 on the card in slot #8, use the [I4O2C8] command. OFFSET: INPUT=0 OUTPUT=0 To connect input 4 to all of the outputs on the card in slot #8, use [I4O*C8] In01 Out1 VOLn = ON/OFF 7.3.5.
MULTITASKER™ Command Format: [OSImCi] the MT110-104 Matrix Switcher as 16x16, 8x8, 4x4 or 2x2 m = offset value from 0 to 128 Command Format: [MATmXnCi] Ci = card ID number (i = number from 4 to 19) mXn = matrix size: 16X16, 8X8, 4X4 or 2X2 Ci = card ID number (i = number from 4 to 19) Example: [OSI128C16] sets the input offset value to 128 for the card in slot #16. 16x16 7.3.8. [OSO] Input This command sets the output offset value.
MULTITASKER™ 4x4 Input O3a O3b O3c O3d O4a O4b O4c O4d e.g. : [I1O2C5] will connect input1a to output2a, 1b to 2b, 1c to 2c, and 1d to 2d, 1e to 2e, 1f to 2f, 1g to 2g, and 1h to 2h. Output O1a O1b O1c O1d O2a O2b O2c O2d O1a O1b O1c O1d O2a O2b O2c O2d O3a O3b O3c O3d O4a O4b O4c O4d 7.3.12. [CLR] This command resets the card selected to the factory default configuration (Input 1 to all Outputs, all Outputs ON). Command Format: [CLRCi] Ci = card ID number (i = number from 4 to 19) 7.3.13. [....
MULTITASKER™ To enable output 1 and 2 of card #6 and output 3 and 4 of card #17 simultaneously, use the following commands: […S]: Save Output default status. […F]: Enable feedback. […P]: Set path for Input to Output connection. [OFF12C6U3P] [SW]: Switch (outputs the preloaded buffer) [OFF34C17U3P] [SW] TROUBLESHOOTING GUIDE If "F" is included use the [OFFmCnUiPF] command or the [OFFmCnUiFP] command. 8 We have carefully tested and have found no problems in the supplied MT110-104.
MULTITASKER™ ALTINEX POLICY 8.2. DISTORTED SOUND A) Cause 1: The source level is above 1Vp-p Solution: Make sure that the source level is below 1V p-p. If the sound is still distorted, see Cause 2. B) Cause 2: Solution 1: Solution 2: 9.1. LIMITED WARRANTY / RETURN POLICY Please see the Altinex website at www.altinex.com for details on warranty and return policy. 9.2. CONTACT INFORMATION The destination amplifier provides excessive amplification. ALTINEX, INC.
