User`s guide

MT
MTMT
MT103
103103
103-
--
-102
102102
102 User’s Guide
400-0107-006
3
5. About Your MT103-102
The MT103-102 1-In, 3-Out VGA DA card is designed to connect a single computer video source to three monitors or projectors. The MT103-102 supports
resolutions from VGA through QXGA. Each output is buffered and does not require a termination if unused.
Female 15-pin HD (VGA-type) connectors are provided for each input and output. If used together with 15-pin HD to 5 BNC adapter cables available from
ALTINEX, the VGA DA series can pass RGBHV format video signals where 5 BNC cable installations are already in place.
For maximum power and flexibility, the MT103-102 offers the greatest bandwidth performance, and the ability to turn each output on or off through RS-232 or
front panel control. On/Off control is augmented by screen blanking which eliminates annoying signal-loss messages by maintaining the sync signal on all
attached projectors and monitors. The MT103-102 can be connected to an MT103-104 or MT103-109 VGA DA expansion card in order to provide 6 additional
VGA outputs. For more information on expansion, see the MT103-104 and MT103-109 cards.