User`s guide

MT115
MT115MT115
MT115-
--
-110 Video+Audio Dual TP Transmitter
110 Video+Audio Dual TP Transmitter110 Video+Audio Dual TP Transmitter
110 Video+Audio Dual TP Transmitter User’s Guide
User’s GuideUser’s Guide
User’s Guide
400-0433-006 12
Group Commands
Group commands allow several cards with the same functions to be
controlled simultaneously with a single command. Up to 8 groups (G1-G8)
may be defined. These commands apply to all cards, not only the
MT115-110.
25. [WR]
This command adds cards to a group. In MultiTasker systems with
audio and video cards, the groups are typically as follows:
Group 1 = Video Cards
Group 2 = Audio Cards
Group 3 = Video and Audio Cards
Command Format: [WRCn 1 Cn 2 …Gk]
Cn = Card ID (n = slot # from 1 to max slots)
Gk = Group ID (k = # from 1-8)
Example:
Add C2, C4, and C6 to G5 by sending the command [WRC2C4C6G5].
After executing this command, G5 will consist of C2, C4, and C6.
Now add C8 to G5 by sending [WRC8G5]. C8 is added to G5, and G5
is not overwritten. View the contents of G5 by sending [RDG5] and
receiving the following feedback:
[G5=C2C4C6C8]
26. [RMC]
This command removes one or more cards from a group.
Command Format: [RMCn 1 Cn 2 …Gk]
Cn = Card ID (n= # from 1 to max slots)
Gk = Group ID (k = # from 1-8)
Example:
G5 consists of C2, C4, C6, and C8. Remove C6 and C8 by sending
[RMC6C8G5]. View the contents of G5 by sending [RDG5] and
receiving the following feedback:
[G5=C2C4]
27. [RMG]
This command deletes one or all groups.
Command Format: [RMGk]
Gk = Group ID (k = # from 1-8, * for all)
Example:
Remove all cards from G52 by sending [RMG5]. The system will
return the following feedback:
[G5=0]
Example 2:
Remove all cards from all groups, effectively deleting all groups, by
sending [RMG * ]. The system will return the following feedback:
G1-G8: EMPTY
28. [RD]
This command reads and then displays the members in a group.
Command Format: [RDGk]
Gk = Group ID (k = # from 1-8)
Example:
C2, C4, and C6 make up G5. Read the member data for G5 by sending
the command [RDG5]. The system will return feedback as follows:
[G5=C2C4C6]
The feedback shows G5 and then the cards that make up G5. In this
case, G5 includes C2, C4, and C6.