SPECIAL APPLICATION The DS801-202 is shown above.
SPECIAL APPLICATION TABLE OF CONTENTS Page PRECAUTIONS / SAFETY WARNINGS ............... 2 GENERAL..........................................................2 INSTALLATION .................................................2 CLEANING.........................................................2 FCC NOTICE .....................................................2 ABOUT YOUR DS801-201/202 ............................... 3 TECHNICAL SPECIFICATIONS ............................ 3 DESCRIPTION OF DS801-201/202 .............
SPECIAL APPLICATION PRECAUTIONS / SAFETY WARNINGS • 1 Please read this manual carefully before using your DS801-201/202. Keep this manual handy for future reference. These safety instructions are to ensure the long life of your DS801-201/202 and to prevent fire and shock hazards. Please read them carefully and heed all warnings. 1.1 GENERAL • Qualified ALTINEX service personnel or their authorized representatives must perform all service. 1.
SPECIAL APPLICATION ABOUT YOUR DS801-201/202 2 TECHNICAL SPECIFICATIONS DS801-201/202 WALL MOUNT VIDEO + AUDIO TO TWISTED PAIR (UTP) TRANSMITTER FEATURES/ DESCRIPTION GENERAL The DS801-201/202 provides a means of transmitting computer video and audio signals over Twisted Pair-type (CAT-5/6) cable when used together with an ALTINEX UTP receiver, such as the DS801-111. Video equalization allows for transmission over cable lengths up to 400 ft (122 m).
SPECIAL APPLICATION MECHANICAL DS801-201/202 ELECTRICAL DS801-201 Inside Wall Dimensions DS801-201/202 Input Height 2.60 in (66 mm) Video Analog Signal Width 3.52 in (90 mm) Video Sync Level TTL Depth 1.28 in (33 mm) Audio Signal Level 1.0 Vp-p max. DS801-202 Inside Wall Dimensions Height Output 2.60 in (66 mm) Width 5.40 in (137 mm) Depth** 1.28 in (33 mm) Video+ Stereo Audio 9 VDC 4.56 in (116 mm) Width - DS801-202 6.38 in (162 mm) Height - DS801-201/202 4.50 in (114 mm) 0.
SPECIAL APPLICATION DESCRIPTION OF DS801-201/202 4 DS801-201 DESCRIPTION POWER SIGNAL FRONT VIEW AUDIO INPUT VIDEO INPUT EQUALIZATION LOCAL VIDEO OUTPUT LOCAL AUDIO OUTPUT BACK VIEW 4 TP OUTPUT OUTPUT POWER 400-0447-003 5
SPECIAL APPLICATION DS801-202 DESCRIPTION POWER SIGNAL FRONT VIEW AUDIO INPUT VIDEO INPUT EQUALIZATION LOCAL VIDEO OUTPUT LOCAL AUDIO OUTPUT BACK VIEW 4 TP OUTPUT OUTPUT POWER 400-0447-003 6
SPECIAL APPLICATION APPLICATION DIAGRAMS 5 DIAGRAM 1: TYPICAL SETUP DS801-201 or DS801-202 INSIDE WALL PORTION FITS STANDARD OUTLET BOX OPENINGS DS801-201 = 2-GANG and DS801-202 = 3-GANG CAT5 OUTPUT COMPUTER/COMPONENT VIDEO AND AUDIO INPUT LOCAL COMPUTER/COMPONENT VIDEO AND AUDIO OUTPUT LOCAL COMPUTER LOCAL MONITOR AND SPEAKERS 400-0447-003 7
SPECIAL APPLICATION DIAGRAM 2: INTERNAL VIEW INPUT OUTPUT R LOCAL MONITOR OUTPUT 15-PIN HD G B H V COMPUTER/ COMPONENT VIDEO 15-PIN HD R PAIR3 G PAIR2 B PAIR1 PLUG AND PLAY 4 - TP OUT RJ-45 PAIR4 H/W V SYNC PROCESSING H EQ SIGNAL DETECT MONO LOCAL STEREO AUDIO 3.5mm L OSC AUDIO MODULATION STEREO R L R POWER 9VDC, 0.5A 2-PIN TB 400-0447-003 + GND POWER SUPPLY 8 LOCAL STEREO AUDIO 3.
SPECIAL APPLICATION INSTALLING YOUR DS801-201/202 6 OPERATION 7 Step 1. Determine the best location for the DS801-201/202 and TP Receiver. Where possible, locate the DS801-201/202 as close to the video source as possible and the receiver as close to the receiving component as feasible. The DS801-201/202 requires no adjustments for normal operation. Once connected and the equalization set, the DS801-201/202 will work trouble-free with no user intervention.
SPECIAL APPLICATION Cause 5: Solution: The display has a problem. Make sure the display has power and is turned on. If there is still no display, please call ALTINEX at (714) 990-2300. 8.2 NO SOUND Cause 1: Solution: Cause 2: Solution: Cause 3: Solution: Cause 4: Solution: 400-0447-003 ALTINEX POLICIES 9 9.1 LIMITED WARRANTY/RETURN POLICIES Please see the ALTINEX website at www.altinex.com for details on warranty and return policies. 9.2 CONTACT INFORMATION The source has a problem.
