SPECIAL APPLICATION MANUAL PART NUMBER: 400-0442-007 DS801-111 INTERA® COMPUTER/COMPONENT VIDEO+ STEREO AUDIO TWISTED PAIR (UTP) RECEIVER
SPECIAL APPLICATION TABLE OF CONTENTS Page PRECAUTIONS / SAFETY WARNINGS ............... 2 GENERAL..........................................................2 INSTALLATION .................................................2 CLEANING.........................................................2 FCC NOTICE .....................................................2 ABOUT YOUR DS801-111....................................... 3 TECHNICAL SPECIFICATIONS ............................ 3 PRODUCT DESCRIPTION ...................
SPECIAL APPLICATION PRECAUTIONS / SAFETY WARNINGS 1.4 FCC NOTICE 1 Please read this manual carefully before using your DS801-111. Keep this manual handy for future reference. These safety instructions are to ensure the long life of your DS801-111 and to prevent fire and shock hazards. Please read them carefully and heed all warnings. • 1.1 GENERAL • • Qualified ALTINEX service personnel or their authorized representatives must perform all service. 1.
SPECIAL APPLICATION ABOUT YOUR DS801-111 2 TECHNICAL SPECIFICATIONS DS801-111 Intera Twisted Pair (UTP) to Video + Stereo Audio Receiver Specifications are subject to change. See www.altinex.com for up-to-date information. The DS801-111 provides a means of receiving computer video and audio signals over Twisted Pair-type (CAT-5/6) cable when used together with a compatible ALTINEX Twisted Pair (UTP) video transmitter, such as the DS801-110 or DA1930CT.
SPECIAL APPLICATION MECHANICAL Housing DS801-111 ELECTRICAL 0.036 in Aluminum Front Panel Input 0.035 in Steel Video+ Stereo Audio Length 4.100 in (104 mm) Output Width 1.380 in (35 mm) Video Analog Signal Height 1.200 in (30 mm) Video Sync Level Weight 0.25 lb (0.11 kg) Audio Level T° Operating 10°C-50°C T° Maximum 75°C Humidity External Adapter: 9 VDC 1.0 Vp-p max. TTL 0 dB +/- 0.5 dB at 1 KHz 410 mA (3.7 W) max. Table 3. DS801-111 Electrical 38,000 hrs Table 2.
SPECIAL APPLICATION PRODUCT DESCRIPTION 4 VIDEO EQUALIZATION POWER/SIGNAL PRESENT LED VIDEO OUTPUT AUDIO OUTPUT 4TP INPUT POWER 400-0442-007 5
SPECIAL APPLICATION APPLICATION DIAGRAMS 5 DIAGRAM 1: TYPICAL SETUPS DS801-110 DS801-111 DA 400-0442-007 19 30 CT 6 DS801-111
SPECIAL APPLICATION DIAGRAM 2: INTERNAL VIEW DS801-111 POWER 2-PIN TERM. BLOCK 9 V, 1.1 A PAIR 4 PS AUDIO SEPARATOR SIGNAL DETECT 4TP RJ-45 LP LEFT LP RIGHT POWER V SYNC SEPARATOR H PAIR 2 R/Pr PAIR 3 B/Pb PAIR 1 G/Y H/W EQ 400-0442-007 UNBAL. AUDIO STEREO 3.
SPECIAL APPLICATION INSTALLING YOUR DS801-111 6 OPERATION Step 1. Determine the best location for the DS801-111. Where possible, locate the TP Transmitter as close to the video source as possible and the DS801-111 as close to the receiving component as feasible. The DS801-111 requires only one adjustment to be made for optimal performance. The adjustment is video equalization for long cable lengths. 7.
SPECIAL APPLICATION Cause 4: Video equalization required. ALTINEX POLICIES Solution: Adjust the VIDEO EQUALIZATION on the DS801-111. 9.1 LIMITED WARRANTY/RETURN POLICIES Some monitors are very sensitive to signal quality and this may prevent the monitor from displaying an image until the equalization is adjusted. See the operation section for adjustment details. 9.2 CONTACT INFORMATION Cause 5: The display has a problem. Solution: Make sure the display is powered and is turned on.
