DISTRIBUTION AMPLIFIERS MANUAL PART NUMBER: 400-0067-003 PRODUCT REVISION: 1 DAV0106-V1A2 1-IN, 6-OUT VIDEO/AUDIO DISTRIBUTION AMPLIFIER USER’S GUIDE
DISTRIBUTION AMPLIFIERS INTRODUCTION TABLE OF CONTENTS Page Altinex appreciates your purchase of the DAV0106V1A2 Distribution Amplifier. We are sure you will find it to be a reliable and useful product. PRECAUTIONS / SAFETY WARNINGS ...............2 GENERAL ..........................................................2 INSTALLATION..................................................2 RACK MOUNT SAFETY GUIDELINES ..............2 CLEANING .........................................................
DISTRIBUTION AMPLIFIERS PRECAUTIONS / SAFETY WARNINGS • Handle the DAV0106-V1A2 Distribution Amplifier carefully because dropping or jarring can damage internal components. • Do not place heavy objects on top of the DAV0106-V1A2. If the is to be mounted to a table or wall, use only Altinex made mounting accessories, such as rack mount shelf (DA1293FC, DA1294FC) and cables for optimum setup. • To turn off the main power, be sure to remove the cord from the power outlet.
DISTRIBUTION AMPLIFIERS cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. The DAV0106-V1A2 receives power from a universal power supply and accepts input from 95 to 240 Volts AC at 50 or 60 Hz.
DISTRIBUTION AMPLIFIERS Power Internal Power Supply Power Consumption Enclosure Material Finish Top panel Height (inches) Width (inches) Depth (inches) Weight Ship Weight T° Operating T° Maximum Humidity MTBF (calculations) 90-140V/ 200-240V 10 watts max 0.1” Al Gray Lexan 1.75in (44mm) 8.50in (216mm) 4.93in (125mm) 2.0lbs. (0.91kg) 4.0lbs. (1.
DISTRIBUTION AMPLIFIERS APPLICATION DIAGRAM 5 5
DISTRIBUTION AMPLIFIERS INSTALLING YOUR DISTRIBUTION AMPLIFIER OPERATION 7 6 The DAV0106-V1A2 will operate successfully as long as cables are attached properly and other technical specifications are met. Step 1. Connect the power cord to the unit and plug it into the power outlet. The power indicator LED on the front panel will light. This indicates that the unit is operational. 7.
DISTRIBUTION AMPLIFIERS ACCESSORIES 8 FREQUENTLY ASKED QUESTIONS Model No.
DISTRIBUTION AMPLIFIERS TROUBLESHOOTING GUIDE 11.2 RETURN POLICY 10 It is very important to Altinex that you receive the products that you have ordered and that this product fulfills your need. In the unlikely event, that an Altinex product needs to be returned please follow the policy below: • Please make sure that the input amplitude video analog signal is less than 3V p-p, and the audio voltage level is less than 10V p-p.
