DISTRIBUTION AMPLIFIERS MANUAL PART NUMBER: 400-0155-001 PRODUCT REVISION: 0 DA1921SX CAT-5 COMPUTER VIDEO RECEIVER USER’S GUIDE
DISTRIBUTION AMPLIFIERS TABLE OF CONTENTS Page PRECAUTIONS / SAFETY WARNINGS .............. 2 GENERAL ......................................................... 2 INSTALLATION................................................. 2 CLEANING ........................................................ 2 FCC / CE NOTICE............................................. 2 ABOUT YOUR DA1921SX ................................... 3 TECHNICAL SPECIFICATIONS........................... 3 DESCRIPTION OF DA1921SX....................
DISTRIBUTION AMPLIFIERS PRECAUTIONS / SAFETY WARNINGS 1 Please read this manual carefully before using your DA1921SX. Keep this manual handy for future reference. These safety instructions are to ensure the long life of your DA1921SX and to prevent fire and shock hazard. Please read them carefully and heed all warnings. • 1.1 GENERAL • • • Unauthorized personnel shall not open the unit since there are high-voltage components inside.
DISTRIBUTION AMPLIFIERS • Table 1. DA1921SX General Any changes or modifications to the unit not expressly approved by ALTINEX, Inc. could void the user’s authority to operate the equipment. ABOUT YOUR DA1921SX MECHANICAL DA1921SX Material 0.1” Al Finish ALTINEX Grey Top Panel Lexan Overlay Height (inches) 3.00in (76mm) Width (inches) 4.50in (114mm) Depth (inches) 1.00in (25mm) Weight (pounds) 0.40lb (0.18kg) Ship Weight (pounds) 2.4lbs (1.
DISTRIBUTION AMPLIFIERS DESCRIPTION OF DA1921SX 4 4.1 INPUT 4.2 OUTPUTS The input connector of DA1921SX is a RJ-45 connector, which connects the DA1921SX to the DA1920SX using a CAT-5 cable. A longer input cable may be used but lengths over 15 feet are generally not recommended to preserve the signal quality. The DA1921SX has two outputs with 15-pin HD female connectors. It allows the distribution of video signals to two monitors.
DISTRIBUTION AMPLIFIERS 4.3 LED INDICATOR The DA1921SX offers a special LED on the front panel that provides feedback to the user. When power is connected to the DA1921SX, the LED will turn red. When an active computer source is connected to the DA1921SX, the LED will turn Green, indicating that it is receiving a signal by sensing the presence of the sync portion of the signal. 4.
DISTRIBUTION AMPLIFIERS INSTALLING YOUR DA1921SX 6 ACCESSORIES Model No.
DISTRIBUTION AMPLIFIERS FREQUENTLY ASKED QUESTIONS No: 1 2 3 4 5 6 Question How many feet of cable can I use with the DA1921SX? Is the type of input cable important when I use the DA1921SX? May I use coaxial cable instead ofCAT5 cable? May I use the DA1921SX power supply to power more than one unit at a time? Does the DA1921SX pass DDC signals/ID bits between the display and computer? What are the resolutions of input computer signals that can pass through the DA1921SX? 9 TROUBLESHOOTING GUIDE 10
DISTRIBUTION AMPLIFIERS ALTINEX POLICY returned without an RMA number may experience a delay in service. 11 11.1 LIMITED WARRANTY If your product is out of warranty and needs service, contact the ALTINEX Sales Department for an RMA (Return Material Authorization). Products returned without an RMA number may experience a delay in service. The service charges will be quoted to you before the actual repairs are done.
