DISTRIBUTION AMPLIFIERS MANUAL PART NUMBER: 400-0001-003 PRODUCT REVISION: 1 DA1902SX 1 RGBHV - IN, 2 VGA - OUT DISTRIBUTION AMPLIFIER USER’S GUIDE
DISTRIBUTION AMPLIFIERS INTRODUCTION TABLE OF CONTENTS Page Altinex appreciates your purchase of the DA1902SX Distribution Amplifier. We are sure you will find it a reliable and useful product. PRECAUTIONS / SAFETY WARNINGS ...............2 GENERAL ..........................................................2 Superior performance for the right price backed by solid technical and customer support is what we have to offer. RACK MOUNT SAFETY GUIDELINES ..............2 INSTALLATION...........................
DISTRIBUTION AMPLIFIERS PRECAUTIONS / SAFETY WARNINGS • Do not place heavy objects on top of the DA1902SX. If the DA1902SX is to be mounted to a table or wall, use only Altinex made mounting accessories, such as mount minibrackets DA1295SX and cables for optimum setup. • To turn off the main power, be sure to remove the cord from the power outlet. The power outlet socket should be installed as close to the equipment as possible, and should be easily accessible.
DISTRIBUTION AMPLIFIERS required to correct the interference at his/her own expense. • Any changes or modifications to the unit not expressly approved by Altinex, Inc. could void the user’s authority to operate the equipment. TECHNICAL SPECIFICATION 3 FEATURES/DESCRIPTION DA1902SX GENERAL 1 Inputs Input Connector 5 BNC Female 2 Outputs Output Connectors Two15-pin HD Female High Resolution Compatibility RGBHV, RGBS, RGsB and RsGsBs Table 1.
DISTRIBUTION AMPLIFIERS Vertical Power External Power Adapter Table 3. DA1902SX Electrical DESCRIPTION OF DA1902SX 47-180 Hz 9V 500mA 4 INPUT AND OUTPUTS PIN No. Input signals on 15-pin HD female connector 1 Red 2 Green 3 Blue 4 No connection 5 No connection 6 Ground 7 Ground 8 Ground 9 No connection 10 Ground 11 No connection 12 No connection 13 Horizontal Sync 14 Vertical Sync 15 No connection Table 1.
DISTRIBUTION AMPLIFIERS APPLICATION DIAGRAM 5 In the Serial Distribution System, the DA1904SX acts as an output module. Ordinarily, the source signal is connected to the input of a DA1902SX and this becomes the starting point for the bus. The outputs are then connected to the output modules, DA1904SX, which are usually located at each display site. The output modules provide a way in which the display can be fed while still maintaining a video bus output, which can be connected to several monitors.
DISTRIBUTION AMPLIFIERS INSTALLING YOUR DISTRIBUTION AMPLIFIER be connected to the units of the DA1904SX by using VGA type cables (Altinex CB3700 Series Cables). 6 Step 1. Make sure that the correct power adapter is connected to the unit. A red LED will light to indicate that the unit is receiving power. Step 4. If the DA1902SX is being used in the Serial Distribution System, make sure that the end of the video bus is properly terminated with a monitor or with a termination plug.
DISTRIBUTION AMPLIFIERS OPERATION 7 FREQUENTLY ASKED QUESTIONS The DA1902SX will operate successfully as long as the cables are attached properly and other technical specifications are followed. There are no other adjustments necessary to operate the unit. ACCESSORIES Model No.
DISTRIBUTION AMPLIFIERS the DA1902SX? 11.2 RETURN POLICY signals. TROUBLESHOOTING GUIDE It is very important to Altinex that you receive the products that you have ordered and that this product fulfills your need.
