DISTRIBUTION AMPLIFIERS MANUAL PART NUMBER: 400-0002-003 PRODUCT REVISION: 1 DA1206RM 1–IN, 2-OUT RGBS DISTRIBUTION AMPLIFIER USER’S GUIDE
DISTRIBUTION AMPLIFIERS INTRODUCTION TABLE OF CONTENTS Page Thank you for purchasing the DA1206RM Video Distribution Amplifier. We are sure you will find it reliable and simple to use. PRECAUTIONS / SAFETY WARNINGS ...............2 GENERAL ..........................................................2 Superior performance for the right price, backed by solid technical and customer support is what Altinex has to offer. RACK MOUNT SAFETY GUIDELINES ..............2 INSTALLATION...............................
DISTRIBUTION AMPLIFIERS PRECAUTIONS / SAFETY WARNINGS 1 Please read this manual carefully before using your DA1206RM Distribution Amplifier. Keep this manual handy for future reference. These safety instructions are to ensure the long life of your DA1206RM and to prevent fire and shock hazard. Please read them carefully and heed all warnings. • Do not place heavy objects on top of the DA1206RM.
DISTRIBUTION AMPLIFIERS user will be required to correct the interference at his own expense. • TECHNICAL SPECIFICATION 3 FEATURES/DESCRIPTION DA1206RM GENERAL 1 Inputs Input Connector 4-BNC Female 3 Outputs Output Connectors Three 4-BNC Female High resolution RGBS, Compatibility RGsB and RsGsBs, Component, S-Video and Composite Video Table 1. DA1206RM General Any changes or modifications to the unit not expressly approved by Altinex, Inc. could void the user’s authority to operate the equipment.
DISTRIBUTION AMPLIFIERS Vertical 47-180 Hz Power Internal Power Supply 90-140V/200-240V Table 3.
DISTRIBUTION AMPLIFIERS 4.3 VIDEO LEVEL SWITCH 4.1 SYNC POLARITY SWITCH The VIDEO LEVEL Switch can be set to either the standard 0.7V output or to 1.0V output. When the switch is set in the 1.0V output position, this provides approximately a 35% increase in the video signal level. This can be used in installations where cable runs exceed 150 feet. It is not recommended that this switch be set in the 1.
DISTRIBUTION AMPLIFIERS INSTALLING YOUR DISTRIBUTION AMPLIFIER OPERATION 6 Step 1. Make sure that the proper power supply is being used with the unit. The use of an incorrect power supply can result in equipment damage not covered by warranty. Step 2. Connect the power cord to the unit and plug it into the power outlet. The power indicator LED on the front panel will light. This indicates that the unit is operational. Step 3. Step 5.
DISTRIBUTION AMPLIFIERS FREQUENTLY ASKED QUESTIONS No: 1 Question What is a Distribution Amplifier? 2 When should I use the DA1206RM? 3 4 Which signal formats can be passed through the DA1206RM? When should I use “+” position of Sync Polarity switch? 5 When should I use the Sync Level switch? 6 What should I have when the Video Level switch is set in the 1.
DISTRIBUTION AMPLIFIERS ALTINEX POLICY If your product is out of warranty and needs service, contact the Altinex Sales Department for an RMA (Return Material Authorization). Products returned without an RMA number may experience a delay in service. The service charges will be quoted to you before the actual repairs are done. 11 11.1 LIMITED WARRANTY Altinex warrants that its products and cables are free from defects in materials under normal use and service.
