User`s guide

TP115
TP115TP115
TP115-
--
-201/202
201/202201/202
201/202 User’s Guide
400-0554-002
5
TP115-202 Receiver
TP115-202
TP RECEIVER
DIGITAL COAX
TX
IR OUT
ACT
OPTICAL
COMPONENT:
IR TX
RS-232
TP IN
+5V
IR IN
GND
RX
ANALOG
VGA:
TWISTED PAIRS
9V, 350 mA
GREEN VGA
RED YPbPr/
AUDIO
VGA/
COMPONENT
CONVERTOR
+9 VDC IN
2.5 mm JACK
5-pin TERM. BLOCK
CONTROL INPUTS
INPUT RJ-45 F
TWISTED PAIR
ACTIVITY LED
IR/RS-232
VIDEO TYPE
LED
15-pin HD F
AUDIO OUT
3.5 mm Optic Mini F
VIDEO OUT
IR OUTPUT
3.5 mm F (mono)
VIDEO EQUALIZATION
ADJUSTMENT
Digital audio input on left or right channel of 3.5 mm. Local audio is the same format as input audio.
1. Connect twisted pair (TP) in to TP output of TP transmitter. 2. Connect outputs to destination display and/or speakers. 3. Apply power to the TP115-202; verify picture quality at display.
Transmitting IR or RS-232 data requires the construction of a cable; use the term. block mating connector provided (AC101-302). Repeated IR/RS transmissions may cause audio distortion.
COMPLIANT
RoHS
RX to PC Transmit (DB9 pin 3)
GND to PC Gnd (DB9 pin 5)
IR Receiver: AC301-110
INFRARED
IR IN to IR Rcvr Out
GND to IR Rcvr Gnd
RS-233
Optional: +5V for IR Rcvr
TX to PC Receive (DB9 pin 2)
IR Emitter: AC301-111 (to IR OUT)
on Left or Right
TOSLINK Cable: CB429-003
Adjust video equalization if necessary.
Data
Acc.
Audio
Steps
38 kHz Carrier
VID EQ