User`s guide
TP115
TP115TP115
TP115-
--
-201/202
201/202201/202
201/202
User’s Guide
400-0554-002
4
TP115-201 Transmitter
AUDIO
COMPONENT:
DIGITAL COAX
OPTICAL
ANALOG
VGA:
VGA / COMPONENT
CONVERTOR
TWISTED PAIRS
TP115-201
RS-232
9V, 350 mA
IR OUT
IR RX
ACT
RX
IR IN
+5V
GND
GREEN VGA
RED YPbPr/
GREEN EXT EDID
RED INT EDID/
TP OUT
TP TRANSMITTER
TX
VIDEO IN
15-pin HD F
15-pin HD F
VIDEO OUT
LOCAL
LOCAL
3.5 mm Optic Mini F
AUDIO OUT
3.5 mm Optic Mini F
AUDIO IN
OUTPUT RJ-45 F
CONTROL INPUTS
5-pin TERM. BLOCK
TWISTED PAIR
3.5 mm F (mono)
IR OUTPUT
2.5 mm JACK
+9 VDC IN
IR/RS-232
ACTIVITY LED
VIDEO TYPE
LED
LED
EDID SOURCE
INFRARED
TX to PC Receive (DB9 pin 2)
RX to PC Transmit (DB9 pin 3)
GND to PC Gnd (DB9 pin 5)
IR IN to IR Rcvr Out
GND to IR Rcvr Gnd
Optional: +5V for IR Rcvr
Digital Audio In
on Left or Right
IR Emitter: AC301-111 (to IR OUT)
Digital audio input on left or right channel of 3.5 mm.
Transmitting IR or RS-232 data requires the construction of a cable;
use the term. block mating connector provided (AC101-302).
Repeated IR/RS transmissions may cause distortions in audio.
1. Connect audio and video inputs according to top label.
2. Connect local outputs to local display and/or speakers.
3. Connect twisted pair (TP) out to TP input of TP receiver.
4. Apply power to the TP115-201; verify picture quality at receiver.
GND
TOSLINK Cable: CB429-003
Local audio is the same format as input audio.
RS-233
IR Receiver: AC301-110
COMPLIANT
RoHS
Acc.
Audio
Steps
38 kHz Carrier