V-MATRIX MANUAL PART NUMBER: 400-0171-001 VM2142AU 8-OUT AUDIO OUTPUT CARD FOR V-MATRIX TM WITH COVER PLATE USER’S GUIDE
V-MATRIX TABLE OF CONTENTS Page PRECAUTIONS / SAFETY WARNINGS ............... 2 GENERAL.......................................................... 2 INSTALLATION ................................................. 2 CLEANING ........................................................ 2 FCC / CE NOTICE ............................................. 2 ABOUT YOUR VM2142AU ................................... 3 TECHNICAL SPECIFICATIONS ........................... 3 PRODUCT DESCRIPTION ..................................
V-MATRIX PRECAUTIONS / SAFETY WARNINGS 1 Please read this manual carefully before using your VM2142AU. Keep this manual handy for future reference. These safety instructions are to ensure the long life of your VM2142AU and to prevent fire and shock hazard. Please read them carefully and heed all warnings. 1.1 GENERAL • • Qualified ALTINEX service personnel, or their authorized representatives must perform all service. 1.
V-MATRIX ABOUT YOUR VM2142AU 2 TECHNICAL SPECIFICATIONS VM2142AU 8-out V-MATRIX™ Audio Output Card FEATURES/ DESCRIPTION Output Connectors Type The VM2141AU is an 8-out Audio Output Card designed for use in a V-Matrix™ enclosure can handle a wide array of signal formats and connector types. When installed in a V-Matrix™ Basic Enclosure, these Audio Output cards enable the connection of eight audio sources. For inputs, the VM2142AU can be used with the VM2141AU 8in Audio Input Card.
V-MATRIX PRODUCT DESCRIPTION 4 APPLICATION DIAGRAM Note that card is shown with cover plate attached.
V-MATRIX INSTALLING YOUR VM2142AU TROUBLESHOOTING GUIDE 6 We have carefully tested and have found no problems in the supplied VM2142AU; however, we would like to offer suggestions for the following: Step 1. Slide the VM2142AU and the VM2141AU into available slots in the V-Matrix™ Enclosure. Make sure that the cards fit into place. Secure the cards to the VMatrix™ by tightening the retainer screws located on the top and bottom of each cover plate. Step 2.
V-MATRIX ALTINEX POLICY (Return Material Authorization). Products returned without an RMA number may experience a delay in service. The service charges will be quoted to you before the actual repairs are done. 9 9.1 LIMITED WARRANTY ALTINEX warrants that its products and cables are free from defects in materials under normal use and service. This warranty is limited to repairing at company’s factory any part or parts of the product, which upon company’s examination shall disclose to be, thus defective.
