User`s guide

DISTRIBUTION AMPLIFIERS
4
dDESCRIPTION OF DA1907SX 4
4.1 INPUT
The Computer Input connector of DA1907SX is
connected to the Video output of the laptop or
desktop computer. The DA1907SX is provided
with a 3 foot Male to Male VGA Input cable
(ALTINEX part # CB3703MR). A longer input
cable may be used but lengths over 15 feet are
generally not recommended to preserve the
signal quality. If desired, the HD-15 input can be
easily adapted to 5-BNC connector output with a
proper cable.
Often, laptop computers will require a toggle
command, which will instruct the laptop to output
to the internal display as well as to the external
video port simultaneously. You may need to
check the user’s manual for your laptop
computer to determine this command.
PIN No. Input signals on 15-pin HD female connector
1 Red
2 Green
3 Blue
4 ID Bit 4 (Grounded, when ID Bit 4 switch is ON)
5 Ground
6 Ground
7 Ground
8 Ground
9 No connection
10 ID Bit 3
11 ID Bit 1
PIN
No.
Input signals on 15-pin HD female
connector
12 ID Bit 2
13 Horizontal Sync
14 Vertical Sync
15 No connection
4.2 OUTPUTS
The DA1907SX has two buffered outputs with
15-pin HD Female connectors. The Local
Monitor output is amplified output. The Main
output is for the distant presentation display
(large screen monitor or LCD projector) up to
250 feet away. The Main output is pre-
compensated for optimal performance with 75 ft
of Altinex super high-resolution VGA cable. If
desired the outputs can be adapted easily to 5-
BNC connectors with a proper cable.
PIN No. Main Output signals on 15-pin HD female
connector
1 Red
2 Green
3 Blue
4 No connection
5 Ground
6 Ground
7 Ground
8 Ground
9 Composite Sync
10 No connection
11 No connection
12 No connection