User Manual
Table Of Contents
English - 27 -
the production of this TV. Scanning and connecting processes
Connecting Other Wireless Devices
Your TV supports another short range wireless
connection technology too. A pairing is required before
using these kind of wireless devices with the TV set.
You should do the following to pair your device with
the TV:
Set the device to pairing mode
Start device discovery on the TV
Note: Refer to the user manual of the wireless device to learn
how to set the device to pairing mode.
You can connect audio devices or remote controllers
connected audio device in order for wireless connection
feature to work correctly. For audio devices you should
use the Audio Link option in the Settings>Sound
menu, for remote controllers the Smart Remote option
in the Settings>System>Device Settings menu.
Select the menu option and press the OK button to
open the related menu. Using this menu you can
discover and connect the devices that use the same
wireless technology and start to use them. Follow the
on-screen instructions. Start the device discovery. A
list of available wireless devices will be displayed.
Select the device you want to connect from the list and
press the OK button to connect. If “Device connected”
message is displayed, the connection is successfully
established. If the connection fails try it again.
Image transfer and audio streaming
You can also use this type of connection to transfer
images or stream audio from your mobile device to
your TV.
Pair the mobile device and the TV as described before.
Start a device search in your hand-held device. Select
connection on your TV screen and do the same on
your hand held device screen. If no pairing is done,
image transfer or audio streaming to the TV will not
be possible.
The images sent by mobile device will be displayed
connected USB memory drive or set as boot logo, if
the Exit button to terminate displaying the image.
The audio will be routed through the speakers of
streaming unpair the device from your TV if it is paired
with your TV previously. After pairing is completed, a
you want to start audio streaming from your mobile
device. Select Yes and press the OK button on the
remote of the TV. If the connection has succeeded,
all audio will be routed through the speakers of the
TV. A symbol will appear on the upper side of the TV
screen as long as the audio streaming connection is
active. To terminate the audio streaming, you should
Close all running applications and all the menus on
are suitable; .jpg, .jpeg, .png, .bmp
mobile device does not suit these requirements, it will
not be displayed on the TV.
If the AVS option in the Settings>System>More menu
is disabled, the TV will ignore pairing requests and no
information message will be displayed on the screen.
If a device is already paired prior to disabling the AVS
option, it will be able to continue sharing audio/video
with the TV even if the AVS option is disabled.
Note: Wireless devices may operate within the same radio
frequency range and may interfere with one another. To
improve the performance of your wireless device place it at
least 1 metre away from any other wireless devices.
Connectivity Troubleshooting
Wireless Network Not Available
TV wireless connection.
Network menu screen.
If the wireless network does not function properly, try
using the wired network in your home. Refer to the
Wired Connectivity section for more information on
the process.
check the modem (router). If the router does not have a
Connection is Slow
Disruption during playback or slow reactions
You could try the following in such a case:
Keep at least three metres distance from microwave
ovens, mobile telephones, bluetooth devices or any
other WLAN compatible devices. Try changing the
active channel on the WLAN router.
Internet Connection Not Available /
Not Working