User Manual
Table Of Contents
English - 15 -
HDMI Full Range
While watching from a HDMI source, this feature will be visible. You can use this feature
to enhance blackness in the picture.
Reset
Resets the picture settings to factory default settings (except Game mode).
PC Position
Appears only when the input source is set to VGA/PC.
Autoposition
If the image is not centred in VGA mode use this option to automatically adjust the
position of the image. Press OK to start the auto adjustment.
H Position
This item shifts the image horizontally to the right hand side or left hand side of the screen.
V Position
This item shifts the image vertically towards the top or bottom of the screen.
Dot Clock
Dot Clock adjustments correct the interference that appear as vertical banding in dot
intensive presentations like spreadsheets or paragraphs or text in smaller fonts.
Phase
Depending on the input source (computer,etc.) you may see a hazy or noisy picture on
the screen. You can use phase to get a clearer picture by trial and error.
While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be added to the Picture menu
while in PC mode.
Sound Menu Content
Dolby Atmos
Your TV supports Dolby Atmos technology. By means of this technology the sound
You will have the best experience if the input audio bitstream is Atmos. Auto, On and
options will be available. If set as Auto, the TV will switch between On and
modes automatically depending on the input audio bitstream information, if the input
audio bitstream is Atmos this feature will work as if it is set as On. Set as to disable.
DTS TruSurround HD
Enables or disables the DTS TruSurround HD.
Audio Link
Press OK to open the Audio Link menu screen. Using this screen you can discover and
connect the sound devices to your TV wirelessly.
Sound Output
Sets the sound output preference. TV, S/PDIF and HDMI ARC options will be available.
There will be no sound output except through the selected option. If HDMI ARC option
is selected, CEC feature will be enabled. Note: Depending on the selected option some items in
Sound menu will appear as greyed out and will be unavailable.
AVL (Automatic
Volume Limiting)
If the Dolby Audio menu item is set to an option other than the AVL setting options
will change. Auto, Night, Normal and options will be available. In Auto mode the
TV will switch to Normal or Night mode automatically according to the current time
information. If no time information is available this option will always function as Normal.
When the TV switches to NightAuto,
an information bar will pop up on the screen.Please note that compared to Normal
mode Night mode provides more aggressive dynamic compression control which is
suitable for silent environments.
Advanced Settings
Equalizer
Selects the equalizer mode. Custom settings can be made only when in User mode.
Dynamic Bass
Enables or disables the Dynamic Bass.
Sound Mode
You can select a sound mode (If the viewed channel supports).
Digital Out
Sets digital out audio type.
Headphone/
Lineout
select this option as Lineout. If you have connected headphones to the TV, set this
option as Headphone.Please ensure before using headphones that this menu item is
set to Headphone. If it is set to Headphone, the output from the headphone socket will
be set to maximum which could damage your hearing.
Headphone
Sets headphone volume. This option will not be available if the Headphone/Lineout
option is not set as Headphone.
Please ensure before using headphones that the headphone volume is set to a low
level, to prevent damage to your hearing.
Reset
Resets some of the sound settings to factory defaults.