User Manual
Table Of Contents
English - 14 -
Settings Menu Content
Picture Menu Content
Mode
You can change the picture mode to suit your preference or requirements. Picture mode
can be set to one of these options: Cinema, Game (optional), Sports, Dynamic and
Natural.Dolby Vision Modes: If Dolby Vision content is detected Dolby Vision Dark and Dolby Vision
Bright picture mode options will be available instead of Cinema and Natural modes.
Contrast
Adjusts the light and dark values on the screen.
Brightness
Adjusts the brightness values on the screen.
Sharpness
Sets the sharpness value for the objects displayed on the screen.
Colour
Sets the colour value, adjusting the colours.
Energy Saving
For setting the Energy Saving to
Note: Mode.
Backlight
lable (located under the
Energy Saving setting) if the Energy Saving is set to Custom. Highlight and use Left/
Right directional buttons to set.
Picture Zoom
Sets the desired image size format.
Picture Shift
This option may be available (located under the Picture Zoom setting) depending on
the Picture Zoom setting. Highlight and press OK, then use directional buttons to shift
the picture upwards or downwards.
Iris HDR
Virtual HDR function that manipulates colour, saturation and dynamic contrast, basically
converts Standard Dynamic Range picture to High Dynamic Range picture. Set as On
to enable.
Advanced Settings
Dynamic
Contrast
You can change the dynamic contrast ratio to desired value.
Colour Temp
Sets the desired colour temperature value. Cool, Normal, Warm and Custom options
are available.
White Point
If the Colour Temp option is set as Custom, this setting will be available (located under
the Colour Temp setting). Increase the ‘warmth’ or ‘coolness’ of the picture by pressing
Left or Right buttons.
Iris Blue
White colour enhancement function that makes white colour more cooler in order to
make more bright picture. Set as On to enable.
Iris Dimming
Low, Medium, High and options are available. While Iris Dimming is active, it will
Noise Reduction
If the signal is weak and the picture is noisy, use the Noise Reduction setting to reduce
the amount of noise.
Iris Contour
Low, Medium, High and options are available. While Iris Contour is active, it will
Film Mode
motion scenes clearly.
Skin Tone
Skin tone can be changed between -5 and 5.
Colour Shift
Adjust the desired colour tone.
Gamut Mapping
You can use this option to set the range of colours displayed on your TV screen. When
set as On, colours are set according to the source signal. When set as , the TV’s
maximum colour capacity is used by default (recommended option).Note: This option may
not be available depending on the TV model and its features.
Dolby Vision
On,
Dolby Vision logo will be displayed on the lower right side of the screen when Dolby
Vision content is detected.