OPERATING INSTRUCTIONS 4322UHDSM COLOUR TELEVISION WITH REMOTE CONTROL
Wireless Connectivity ............................................ 25 Contents Safety Information ................................................... 2 Mains Supply ........................................................... 2 Markings on the Product.......................................... 2 Environmental Information....................................... 3 Features .................................................................. 4 Ultra HD (UHD)........................................................
Safety Information CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. In extreme weather (storms, lightning) and long inactivity periods (going on holiday) disconnect the TV set from the mains. The mains plug is used to disconnect the TV set from the mains and therefore it must remain readily operable.
WALL MOUNTING WARNINGS WARNING Do not ingest the battery, Chemical Burn Hazard. This product or the accessories supplied with the product may contain a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children.
When the TV is not in use, please switch off or disconnect the TV from the mains plug. This will also reduce or stop the energy consumption. Features • Remote controlled colour TV • Fully integrated digital terrestrial TV (DVB-T-T2) • HDMI inputs to connect other devices with HDMI sockets • USB input • OSD menu system • Stereo sound system • Teletext • Headphone connection • Automatic programming system • Manual tuning • Automatic power down after up to eight hours.
If you highlight No and press OK, the TV will remain on. You can also choose to cancel the Auto Power Down function from this dialogue. Highlight Disable and press OK, the TV will remain on and the function will be disabled. You can enable this function again by changing the setting of the Auto Power Down option from the Settings>System>More menu. TV Control Button & Operation Note: The position of the control button may differ depending on the model. Your TV has a single control button.
1. Home When main menu is opened Home menu bar will be highlighted. The content of the Home menu can be customised by adding options from other menus. Just highlight an option and press the Down directional button on the remote. If you see Add to Home option you can add it to the Home menu. Same way you can delete or change the position of any item in the Home menu. Press the Down directional button and select Delete or Move option and press OK.
Antenna Connection Connect the aerial TV plug to the AERIAL INPUT (ANT-TV) socket located on the rear side of the TV. Rear side of the TV ANT-TV If you want to connect a device to the TV, make sure that both the TV and the device are turned off before making any connection. After the connection is done, you can turn on the units and use them. Content owners use Microsoft PlayReady™ content access technology to protect their intellectual property, including copyrighted content.
[Other Countries outside the European Union] These symbols are only valid in the European Union. Contact your local authority to learn about disposal and recycling. The product and packaging should be taken to your local collection point for recycling. Some collection points accept products free of charge. Note: The sign Pb below the symbol for batteries indicates that this battery contains lead. 1 2 Wireless LAN Transmitter Specifications Frequency Ranges Max Output Power 2400 - 2483.
Remote Control 1. Standby: Switches On / Off the TV 2. Numeric buttons: Switches the channel, enters a number or a letter in the text box on the screen. 3. Language: Displays and changes audio/subtitle language and turns subtitles on or off (digital TV, where available) 4. Mute: Completely turns off the volume of the TV 5. Volume +/- 6. Guide: Displays the electronic programme guide 7. Directional buttons: Helps navigate menus, content, etc.
Connections Connector Type Cables Device VGA Connection (back) YPbPr/PC AUDIO IN Audio Connection (back) YPbPr/PC Audio Cable HDMI Connection (side&back) SPDIF BACK AV SPDIF (Optical Out) Connection (back) Back AV (Audio/Video) Connection (back) HEADPHONE Headphone Connection (side) YPBPR YPbPr Video Connection (back) Audio Video Cable See the illustrations on the left side. You can use YPbPr to VGA cable to enable YPbPr signal via VGA input. You cannot use VGA and YPbPr at the same time.
Switching On/Off To Switch the TV On Connect the power cord to a power source such as a wall socket (220-240V AC, 50 Hz). To switch on the TV from standby mode either: • Press the “ ” button, Programme +/-, a numeric button, Guide button, Netflix button or Freeview Play button on the remote control. • Press the control button on the TV. To Switch the TV Off • Press the “ ” button on the remote control. • Press the control button on the TV, the function options menu will be displayed.
While the search continues a message may appear, asking whether you want to sort channels according to the LCN(*). Select Yes and press OK to confirm. (*) LCN is the Logical Channel Number system that organises available broadcasts in accordance with a recognisable channel number sequence (if available). Note: Do not turn off the TV while initialising first time installation. Note that, some options may not be available depending on the country selection. Media Playback via USB Input You can connect 2.
The TV supports ARC (Audio Return Channel). This feature is an audio link meant to replace other cables between the TV and an audio system (A/V receiver or speaker system). When ARC is active, the TV will mute its other audio outputs automatically and volume control buttons are directed to the connected audio device. To activate ARC set the Sound Output option in the Settings>Sound menu as HDMI ARC. Note: ARC is supported only via the HDMI2 input.
Settings Menu Content Picture Menu Content You can change the picture mode to suit your preference or requirements. Picture mode can be set to one of these options: Cinema, Game (optional), Sports, Dynamic and Natural.Dolby Vision Modes: If Dolby Vision content is detected Dolby Vision Dark and Dolby Vision Mode Bright picture mode options will be available instead of Cinema and Natural modes. Contrast Adjusts the light and dark values on the screen.
HDMI Full Range While watching from a HDMI source, this feature will be visible. You can use this feature to enhance blackness in the picture. Reset Resets the picture settings to factory default settings (except Game mode). PC Position Autoposition Appears only when the input source is set to VGA/PC. If the image is not centred in VGA mode use this option to automatically adjust the position of the image. Press OK to start the auto adjustment.
Network Menu Content Network Type Disable the network connection or change the connection type. Scan Wireless Networks Start a search for wireless networks. This option will be available if the Network Type is set as Wireless Device. Press WPS on your wifi router If your modem/router device has WPS, you can directly connect to it using this option. Highlight this option and press OK. Go to your modem/router device and press the WPS button on it to make the connection.
Dialogue Enhancement This feature provides sound postprocessing options for speech-gated dialogue enhancement. Off, Low, Medium and High options will be available. Set according your preference.Note: This feature has an effect only if input audio format is AC-4 and this effect only applies to TV loudspeaker output.
Software Upgrade Ensures that your TV has the latest software. Press OK to see the menu options. Application Version Displays current software version. Subtitle Mode This option is used to select which subtitle mode will be on the screen (DVB subtitle / Teletext subtitle) if both are available. Default value is DVB subtitle. This feature is available only for the country option of Norway. Auto Power Down Sets the desired time for the TV to automatically go into standby mode when not being operated.
Child Lock: If this option is set to On, the TV can only be controlled by the remote control. In this case the control button on the TV will not work. General TV Operation Using the Channel List The TV sorts all stored stations in the channel list. You can edit this channel list, set favourites or set active stations to be listed by using the Channels menu options. Press the OK button to open the channel list.
Highlight Genre: Displays Highlight Genre menu. Select a genre and press OK. The events in the programme guide matching the selected genre will be highlighted. Guide Search: Displays searching options. Using these options, you can search the programme guide database in accordance with the selected criteria. Matching results will be listed. Now: Displays current event of the highlighted channel. Zoom: Highlight and press OK to see events in a wider time interval.
The Image is not centred in VGA source To have your TV automatically centre the image, enter the PC Position menu in Picture menu, highlight Autoposition and press OK. Wait for it to finish. In order to set the position of the image manually you can use H Position and V Position options. Select the desired option and use Left and Right directional buttons on the remote to set.
Supported File Formats for USB Mode Video File Formats Format File Extension .mpg/.mpeg/.dat/ .vob Video Codec MPEG Layer 1/2/3, AC3 MPEG1/2, H.264, VC1 .ts/.trp/.m2ts/.mts .avi Audio MPEG1/2, MPEG4, H.264, MJPEG .mp4/.m4a/.m4v/ MPEG1/2, H.263, .mov/.qt/.3gp/.3g2/ MPEG4, H.264 .3gpp MPEG 1/2, MPEG4, .mkv H.264 Sorenson Spark, MPEG4, .flv H.264 .ogm/.ogg MPEG1/2, MPEG4 .asf/.wmv MPEG4, WMV3, VC1 .rm/.rmvb RV30, RV40 .
Subtitle File Formats External Subtitles Extension Specification .ssa SubStation Alpha .ass Advanced SubStation Alpha .srt Subripper .sub Micro DVD / SubViewer .sub + .idx VOBSub .txt Micro DVD / TMPlayer / MPL2 .mpl MPL2 .smi Sami .jss JACOSUB .ttml TTML .txt / .sub DVDSUBTITLE .lrc - Internal Subtitles Extension Specification .mkv .mkv .dat, .mpg, .mpeg, .vob .
Supported DVI Resolutions When connecting devices to your TV’s connectors by using DVI converter cable (DVI to HDMI cable - not supplied), you can refer to the following resolution information.
Advanced Settings Connectivity Wired Connectivity To Connect to a Wired Network • You must have a modem/router connected to an active broadband connection. • Connect your TV to your modem/router via an Ethernet cable. There is a LAN port at the rear (back) of your TV. Highlight Advanced Settings and press the OK button. On the next screen you can change the IP and DNS settings of the TV. Highlight the desired one and press Left or Right button to change the setting from Automatic to Manual.
• You must change your modem’s SSID when there are any other modems around with the same SSID. You can encounter connection problems otherwise. Use a wired connection if you experience problems with a wireless connection. Configuring Wireless Device Settings Open the Network menu and select Network Type as Wireless Device to start connection process. Highlight Scan Wireless Networks option and press OK to start a search for available wireless networks. All found networks will be listed.
the production of this TV. Scanning and connecting processes differ according to the program you use. Connecting Other Wireless Devices Your TV supports another short range wireless connection technology too. A pairing is required before using these kind of wireless devices with the TV set.
information on how to connect a different device, such as your TV, to the internet. It is also possible that the connection may not be available due to a firewall problem. If you think this causes your problem, contact your internet service provider. A firewall might be the reason of a connectivity and discovery problem while using the TV in Audio Video Sharing mode or while browsing via Audio Video Sharing feature.
Internet Browser HBBTV System To use the internet browser, enter the Apps menu first. Then launch the internet browser application which has an orange coloured logo with earth symbol on it. In the initial screen of the browser, the thumbnails of the predefined (if any) links to web sites available will be displayed as Speed Dial options along with the Edit Speed Dial and the Add to Speed Dial options. To navigate the web browser, use the directional buttons on the remote or a connected mouse.
Note: You can enable or disable this feature from the Privacy Settings menu in Settings>System>Privacy menu. Smart Center Smart Center is a mobile application running on iOS and Android platforms. With your tablet or phone, you can easily stream your favourite live shows and programmes from your smart TV. Also; you can launch your applications, use your tablet as a remote control for your TV and share media files. Note: Being able to use all functions of this application depends on the features of your TV.
Multilanguage audio support and subtitle on/off features are not functional. The streaming performance may change depending on the quality of your connection. Media Share Page To access the Media Share widget tap on the Uparrow on the bottom left side of the screen. If the Media Share widget is pressed, a screen is displayed where you can select the media file type to share with your TV. Note: Not all image file formats are supported.
• Examples about the use of the feature will be displayed on the next screen. Press OK to finish the setup. If you carried out the setup after the first time installation you will return to the first screen of the setup wizard when you press OK. In that case press Exit or highlight Setup Later and press OK in order to exit the setup. Once the setup is complete, you will be able to control the functions of your TV with Alexa. Note: Make sure that the devices are connected to the internet.
Important Instructions For your own safety read the following instructions carefully before attempting to connect this unit to the mains supply.
VESA WALL MOUNT MEASUREMENTS Hole Pattern Sizes (mm) W H 100 100 W H Screw Sizes Length (X) Thread (Y) min. (mm) 7 max. (mm) 8 M4 Hereby, VESTEL Elektronik Sanayi ve Ticaret A.Ş., declares that the radio equipment type TFT IDTV is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: doc.vosshub.
50640722
