Installation manual
Software Installation
AltiWare OE System Administration Manual 57
Software Installation
8. Setup will retrieve logon information to determine if the user has
corresponding privilege.
9. Setup will retrieve system key and install its driver, if applicable.
WARNING!
If the system key is not available, Setup will terminate.
10. Setup will check AltiGen boards on your system.
Note: Setup will terminate if T1 Rev. A1/A2 or VoIP Rev. A1/A2 boards
are found. These boards are not supported in OE 4.5.
11. Setup will check existing licenses to see if they are registered or
partially registered. Depending on these conditions, Setup will proceed
to either Sub-step 1A. — No registered Licenses or Sub-step 1B. —
Partially Activated Licenses.
Note: OE 4.0 license keys are not compatible with OE 4.5. You need to
register all OE 4.5 license keys through registration process.