Installation manual

36 AltiWare OE System Installation & Administration Manual
Recommended AltiServ System Configurations*
Table 4. System Selection Guidelines
*Individual requirements may vary depending on particular applications. Please contact
AltiGen Sales Engineering or Technical Support for assistance on selecting the most
appropriate system configuration for your installation.
Power Requirements
The power requirements are as follows for each individual board:
Table 5. Individual Board Power Requirements
*1A@12V is provided by power connector.
Number of
Quantum or Triton
Boards per System
CPU Type
Available
Memory
Hard Disk Controller
Power Supply
5V Requirement
12V Requirement
1–3 333 MHz 128
MB
IDE/
SCSI
Single 300W 15A 6A or
better
4–6 700 MHz 256
MB
IDE
ATA-
100/
SCSI
Single 400W
or Dual
400W load
sharing rec-
ommended
20A 16A
7–16 850+
MHz
512
MB
IDE
ATA-
100/
SCSI
Dual 400W
with load
sharing
required
40A 20A
Board 5V 12V Slot Type
Quantum 1.6 1.4A ISA
Triton Analog Station 1.6 1A* PCI
Triton Analog Trunk 1.6 0.25A PCI
Triton VoIP 1.6 0 PCI
Triton T1/PRI 1.6 0 PCI
Triton Resource 1.6 0 PCI