Installation manual

34 AltiWare OE System Installation & Administration Manual
• Before installing AltiWare OE: on the root directory of the AltiWare
OE CD-ROM; this file will be installed when you install the software.
• After installing AltiWare OE: in the \AltiServ\SP directory on your
hard drive.
AltiGen Board Options
Table 2 lists the AltiGen telephony board modules. This selection allows
you to optimize your system based on the trunk/extension mix required at
your site.
Table 2. AltiGen Telephony Board Options
* When you upgrade to AltiWare OE 4.5, all 8-port boards are automati-
cally upgraded to 12-port boards. With a 30-port upgrade license, the 12-
port board can be upgraded to a 30-port board (one board upgrade per
license). The original ports retain their configurations, but you must con-
figure the new ports if you want to use them
.
Board Model Number Description
Quantum ALTI-CD0408UD-
SPH001
4trunksand8extensions
Quantum ALTI-CD0804UD-
SPH001
8trunksand4extensions
Quantum ALTI-CD0012UD-
SPH001
12 extensions
Quantum ALTI-DID0408UD-
SPH001
4DIDtrunksand8extensions
Triton ALTI-TTAS-12 12 extensions (stations)
Triton ALTI-TTIP-4 4 VoIP trunks or extensions
Triton ALTI-TTIP-8 12 or 30 VoIP trunks or
extensions*
Triton ALTI-T1E1 1 T1, 1 E1 or 1 PRI
Triton ALTI-TTRS 12 ports for supervisor monitoring
Triton ALTI-TTAT-12GS 12 trunks, ground start/loop start
Triton ALTI-TTAT-12 12 trunks, loop start only