Installation manual

Call Accounting Report Formats
AltiWare OE System Installation & Administration Manual 377
Call Accounting
Report Formats
Call Accounting
Report Formats
CallerType Type of line for an
incoming call
UBYTE 0=Unknown
1=Ext analog
2=Ext IP
3=Ext PHS (not
used)
4=Ext virtual
5=Ext WG
11=trk analog
12=trk T1
13=trk IP
14=trk PRI
15=trk PHS (not
used)
CallerPad Line’s physical
address for an
incoming call
UCHAR
(5)
E.g. “0004”,
where “00”=slot,
“04”=channel
Always “-1-1”
for WG orvirtual
extension
CallerNum Caller phone number
of an incoming call
(extension number or
off-net PSTN)
UCHAR
(41)
CallerName Caller name for an
incoming call
(providedbyCOfor
trunk calls; as entered
in AltiAdmin for
extension calls)
UCHAR
(65)
Table 1: CDR Call Format
Database
Element
Definition Type Specification