Installation manual

AltiServ Office Solutions
AltiWare OE System Installation & Administration Manual 3
Overview
AltiServ Platforms
In addition to the office suite of products, AltiServ platforms can be built
using a standard personal computer or server hardware with sufficient
number of full-size ISA and PCI expansion slots. In addition, the platform
must be equipped with sufficient cooling processing power, memory, hard
drive storage capacity, power, and telephony ringing voltage for the total
number of cards and extensions ports installed. This AltiServ platform
must be equipped with a Windows 2000 Server or a Windows NT 4.0
(or higher) Server with Service Pack 6a (or higher) installed.
Components Chassis Specifications
AltiWare OE 4.5
AltiView 4.5
AltiWare OE Documentation Package
24-port Triton Digital T1/PRI PCI Card
Three 12-port Triton Analog Station PCI
Cards
36 Station / 42 Session License
Windows 2000 Server (Service Pack 2) w/ 5
users licenses
MVIP Cable
Three 12-port connection panels (harmonica)
Three DB25-50 pin male Telco cables
4U Rack Mount Chassis w/ slide rails
1 ISA x 17 PCI (1 ISA x 11 PCI Available)
850 mhz Intel Pentium III Processor
512 MB RAM
52x CDROM Drive
Adaptec 2100S Ultra160 RAID Controller
Three 18GB SCSI Drives in RAID 5 Configuration (36
GB Available)
3½ 1.44 Floppy Drive
101 key PS/2 keyboard
PS/2 Microsoft Mouse
Two 400 Watt Load Sharing / Redundant / Hot Swap
Power Supplies
Three 86 CFM hot-swappable fans
Dimensions (W x H x D) 19" x 7" x 26"
CE/UL/C-UL/FCC Approvals & Certifications