Installation manual

Data and Internet Integration
AltiWare OE System Installation & Administration Manual 279
Data Internet
Integration
Data and Internet
Integration
Data and Internet
Integration
4. Complete the entries in this dialog box as follows:
•IntheLog On As group, select This Account and set
<DomainName>\AltiGen_<ServerName> as the account. In this
example, it is ALTICHINA\AltiGen_telesystem.
If this is not the case, you need to re-install AltiWare while logged
in as a domain administrator with local administrator privileges.
• Repeat the previous step, but this time, check the Log On As
account for AltiGen Exchange Integration Service COM Server.
Exchange Server Prerequisites
• Exchange Server 5.5 with Service Pack 3
• Successful ping to the AltiServ and vice versa
• Exchange Server Services must be started
To check the NT version:
Click the Start button, select Run, and type winver in the Run dialog
box.
To check the Exchange Server version:
Click About in the Exchange Administrator.
To ping the Exchange Server from AltiServ and vice versa:
From the AltiServ system, open a MS-DOS window, and type ping
<exchange server name>
,thenpressenter.
For example, type
ping mailserver. You should see Reply
from...
as the response. If you see Request timed out,thereis
something wrong with your network settings or connectivity.
Similarly, ping the AltiServ system from the Exchange server. For
example, from the command prompt in Exchange Server, type
ping
telesystem
, then press enter. You should get proper reply.