Installation manual

Extension and Workgroup Configuration
AltiWare OE System Installation & Administration Manual 213
Extension and
Workgroup
Configuration
To work with mailbox settings, select the extension number you want to
work with from the list in the Extension Configuration General window,
then click the Mailbox Setting tab to open the Mailbox Setting window.
Figure 10. Mailbox Setting window, Extension Configuration
Note: You can use Apply to… to apply mailbox settings to one, some, or
all extensions. See “Apply or Apply To…?” on page 190 for more
information on using Apply to….
Setting an Information-Only Mailbox
You can select the Information Only Mailbox check box to set virtual or
physical extension mailboxes to Information Only, then click Apply or
Apply to… to set one or more extension mailboxes.
An Information Only mailbox allows callers to listen to customized
recorded announcements but does not provide taking messages from the
caller. To repeat the message, callers are instructed to press the # key.
You cannot set a workgroup pilot number mailbox to Information Only.