Installation manual

Trunk Configuration
AltiWare OE System Installation & Administration Manual 179
Trunk Configuration
Triton Analog Trunk LS/GS and LS Properties
To configure a Triton Analog Trunk LS/GS or LS channel, select a Triton
Analog Trunk channel from the trunk channels list in the Trunk
Configuration window, then click the Trunk Properties button or double-
click the list entry to view the Configuration dialog box.
Figure 4. Triton Analog Trunk Properties window
Note that you can use Apply to… on this dialog box to apply changes to
other trunks of the same type.
Parameter Description
Interface Type For the LS/GS model, can be one of the following:
• Loop Start Trunk
• Ground Start Trunk
For the LS model, only Loop Start Trunk is available.