Installation manual

Board Configuration
AltiWare OE System Installation & Administration Manual 165
Board Configuration
Setting up T1 or PRI Channels on the Triton T1/PRI
Board
Use the T1/PRI Configuration button (see Figure 10) to invoke the T1/
PRI Configuration window. The Triton T1/PRI Board can be configured
to either T1 or ISDN PRI through the configuration options within the
window.
Note: In a tie-trunk configuration, set the trunks to “Out of Service”
before changing the trunk type from T1 to PRI or vice versa.
Otherwise, the system will generate garbage call records to your
internal or external logger service. See “Setting General Trunk
Attributes” on page 173 for details.
Figure 11. T1/PRI Configuration window
The CH -> Type list displays the channel types.