Installation manual

Configuring the Triton T1/PRI Board
158 AltiWare OE System Installation & Administration Manual
DNIS Digits:canbe3to10digits
CSU/DSU Requirements
The CSU (channel service unit) is a device used to connect a digital trunk
line coming in from the phone company to the PBX. A CSU can terminate
signals, repeat signals, and respond to loopback commands sent from the
central office.
Board Configuration
Double click the board’s icon in the Boards window (see Figure 1) to open
the Board Configuration window.
Figure 8. Board Configuration window (Triton T1/PRI Board)
The Board Configuration window for the Triton T1/PRI board displays
the same options as the Quantum board, which are discussed in
“Configuring the Quantum Board” on page 142, but there are additional
options available. The Board ID must be in the range 0–5.
•TheBoard Configuration button invokes a configuration dialog box
: