Installation manual

Board Configuration
AltiWare OE System Installation & Administration Manual 147
Board Configuration
Configuring the Triton VoIP Board
Voice over IP for AltiWare OE
AltiWare OE includes the option for Voice over IP (VoIP) functionality,
which in previous releases required the installation of AltiWare IP
software.
VoIP for AltiWare OE runs on an H.323 platform that allows voice calls to
be made through an IP network. It includes an integrated VoIP gateway to
convert voice calls into IP packets and transmit them through the IP
network. It also has the capability of networking multiple AltiServs into a
virtual PBX network. This enables calls to be made through the IP network,
which allows for significant savings in toll charges.
Triton VoIP Board
The Triton VoIP board is used to provide voice processing resources for
AltiWare OE, similar to the way Quantum telephony boards are used for
analog trunks and extension lines. Unlike the Quantum telephony boards,
however, only IP trunks are provided on the Triton VoIP board. AltiWare
VoIP uses DSP engines residing on the Triton VoIP board to perform the
voice processing functions needed for H.323 devices. Quantum and Triton
boards are connected via MVIP connectors.
Features
The following features are automatically enabled during AltiWare OE
installation.
Board Configuration Displays the board’s serial number.
Reset Board Resets the board, after you confirm resetting by
accepting a warning.
Important: Resetting a board will disconnect all
calls in progress on that board! Be sure
to inform all users before resetting a
board.
Parameter Description