Installation manual

Configuring the Triton Analog Trunk LS/GS and LS Boards
146 AltiWare OE System Installation & Administration Manual
Double click the board’s icon in the Boards window (see Figure 1) to open
the Board Configuration window.
Figure 5. Board Configuration window (Triton Analog Trunk)
The Board Configuration window contains the following attributes:
Parameter Description
Board Info Group Board Logical ID: assigned by AltiServ
Board Name: the type of board installed in the
system and board ID.
Note: This is informational only and cannot be
edited.
Channel Mapping
List Group
Shows the board Logical Channel, Physical Span,
and Physical Channel.
To reinitialize channels, select the channel to reset
andclicktheReset Channel button, then click OK.
Note: This is informational only and cannot be
edited.
Note: Double clicking a channel in this window
invokesa channelconfiguration window. See
“Triton Analog Trunk LS/GS and LS
Properties” on page 179.
Span Info Not available for Triton Analog Trunk LS/GS and
LS boards.