Installation manual

Configuring the Triton Analog Station Board
144 AltiWare OE System Installation & Administration Manual
Configuring the Triton Analog Station Board
Double click the board’s icon in the Boards window to open the Board
Configuration window.
Figure 4. Board Configuration window (Triton Analog)
Use the Board Configuration window to view the following attributes:
Reset Board Resets the board, after you confirm by accepting a
warning that resetting a board will disconnect all
calls in progress on that board.
Important: Be sure to inform all users before
resetting a board.
Parameter Description
Board Info Board Logical ID: assigned by AltiServ
Board Name: the type of board installed in the
system and board ID.
Note: This is informational only and cannot be
edited.
Parameter Description