User guide

2 MaxMobile Communicator User Guide
Like a remote extension, the G1 phone running MaxMobile Communicator
serves as an office extension, making and receiving calls through the PSTN
(public switched telephone network) to and from your company’s MAXCS
system. You can call company extensions (both inside and remote
extensions) just by dialing the extension number. Your calls to destinations
outside the company can go through the MAXCS system, as illustrated in
figure1, if you so choose.
Requirements
• Supported mobile phone model: G1 Phone from T-Mobile running the
Android operating system. You should be familiar with the keys on the
phone, the status bar icons, and general phone navigation. See the
Getting Started booklet that came with your phone.
• MAX Communication Server ACC 6.5 or MAX Communication
Server ACM 6.5.
• MAXCS must be configured to enable mobile extension features.
• Your system administrator must have assigned a MaxMobile license to
your extension.
Installing MaxMobile Communicator
WiFi (if available) is recommended when you work in your office. The
following steps are used to set up the G1 phone.
Enable Wifi setting on the G1 phone
1. Press the Home key, then press the Menu key and select Settings.
2. Select Wireless controls.
3. Select Wi-Fi.
4. Select Wi-Fi settings and set up and connect to your WiFi network.
Note: MaxMobile Communicator supports only 3G and 2G networks.
3G or WiFi is required for access to the MaxMobile
Communicator call control buttons.