User guide

Chapter 18: Mobile Extension Configuration
254 MAXCS ACC 6.5 Administration Manual
Figure 3. Changing a virtual extension to a physical extension and setting the location
3. By clicking the Next or Prev butto n in the Location panel, select the Logical Board
ID of the MobileExtSP board and Logical Channel ID for this extension, then click
Apply.
The new location is displayed in the Agent/Supervisor/Extension list.
4. Click the Line Properties button to configure the mobile PSTN number and other
options for the mobile extension. The ExtensionAnywhere Configuration -
MobileExtSP dialog box opens. (Alternatively, from the Mobile Extension Board
Configuration dialog box you can double-click the mobile extension port to open the
ExtensionAnywhere Configuration.)