Hardware Owner's manual

MAX2000 System
50 Telephony Hardware Manual
• MAX2000 Server—In standalone server mode, the MAX2000 Server supports the
same software features MAX1000.
When no T1/E1 or one T1/E1 board is installed, you can select:
• 30 G.723/G.729/G.711 IP channels, OR
• 12 G.723/G.729/G.711 IP channels plus 48 G.711-only IP channels
When two T1/E1 boards are installed, the configuration will switch to:
• 12 G.723/G.729/G.711 IP channels and 48 G.711-only IP channels
• MAX2000iG—in gateway mode, the embedded DSP supports:
• 12 combo codec plus 56 G.711 codec
• Two T1/E1 4x4 access boards or any combination of two access boards
Note: The MAX2000iG cannot be used as a standalone server. The embedded DSP
is hard coded as gateway only.
System Limitation for MAX2000 System
• Trunk recording is not supported. Only extension recording is supported.