Owner manual

Advanced Call Router

Advanced Call Router Manual 3

3. Select Op

eration > Logon Info.

4. In the Logon Info window, enter the Server Name that Advanced Call

Router will connect to, along with the Default Virtual Extension and

Password then click OK.

(Optional) Check Auto Start Service to

have Advanced Call Router

start routing calls automatically, after the system restarts or after

Advanced Call Router service has been stopped and restarted.

Note: Up to 8 login attempts are allowed, after which login will be

disabled from 1 to 24 hours (depending on the setting in

MaxAdministrator).

5. Click Start to

run Advanced Call Router. When Advanced Call Router

is stopped, you can configure the server and login information.

6. Route Rules and Show Monitor can be configured after Advanced Call

outer is started.

Advanced Call Router Route Rules

To create route rules that will be used to route calls, select Operation >

Route Rule to open the Route Rule List window. This window also allows

you to view existing route rules, and modify and delete route rules.