Owner manual

Installing MaxAdmin on a Network Client
MaxCS 7.5 Administration Manual 33
• Softswitch (including VM and Enterprise Manager) – Select this option to install Softswitch to the
server. Softswitch provides the following functions:
– Devices Control
• IP Phone
• HMCP Media Server
• IP Gateway
– Call Control
• Call Signal Processing (SIP tie trunk)
• PBX Switching, Routing, and Call Handling
– System Management
• Configuration and Directory
• Phrases and Prompts (System, Custom, Personal)
– Feature Server
• Voice Mail Server
• Multi-Site Enterprise Manager
• Call Center Feature Server
• CTI Server
• Exchange Integration Server
• CDR Server
• HMCP Media Server – For softswitch deployment, select this option.
If your system is larger, install HMCP Media Server and Softswitch on different servers.
The HMCP Media Server check box is not available if the operating system is not supported by HMCP
(refer to the operating systems listed in
Minimum System Requirements on page 25). AltiGen supports
HMCP Media Server only on servers provided by AltiGen.
• Gateway – Select this option to install gateway service to an AltiGen IP gateway. The supported gateway
platforms are:
– OFFICE3G server
– MAX2000iG (gateway-only MAX server with redundant power supply and RAID hard drive)
Note: Do not install gateway service to MAX1000 or MAX1000R server. When installing Gateway service
to an OFFICE3G server, remove Triton Resource and MeetMe Conference boards. Softswitch
server will not use these boards as conference/barge-in resources.
If you select Gateway, the next screen requires you to assign an ID to the gateway.
For detailed instructions on installing and upgrading MAXCS, AltiGen Partners should refer to the Knowledge
Base, available from the AltiGen Partner Web Site at https://partner.altigen.com.
Installing MaxAdmin on a Network Client
MaxAdministrator can be installed on a client workstation, providing the ability to manage the MAXCS server
remotely. The system running MaxAdministrator and the MAXCS server must be on the same Windows
domain.
When you install MaxAdmin on a machine that is not a MAXCS server, it does not contain the switching, SMTP/
POP3 server, messaging agent, AltiBackup, and Exchange integration services that are included in the full
MAXCS installation. Remote MaxAdmin does not utilize the System Data Management or Shutdown Switching
Service functions on the MAXCS system.