Owner manual

Chapter 28: Microsoft Exchange Integration
360 MaxCS 7.5 Administration Manual
Figure 210. Setting the Dial Code
Outgoing Configuration
• Outside line access code – The trunk access code of your Softswitch
• International access code – Toll call prefix for international calls. For the U.S., it is "011"
• National number prefix – Toll call prefix for domestic calls, always set as "1"
• Country/Region code – Country code. For the U.S., it is "1"
Incoming Configuration
• In-country/region number format
• Use this field to specify how a user's telephone number should be dialed by the UM Server in a different
dial plan, but having the same country code. This is used by an auto attendant and when an Outlook
Voice Access subscriber searches and tries to call the user in the directory.
• This entry consists of a number prefix and n number of x characters (for example, 020xxxxxxx).
• To determine the telephone number, UM will append the last n-digits from the telephone number that
is specified in the directory to the prefix that is specified.
• International number format
• Use this field to specify how a user's telephone number should be dialed by the UM Server in a different
dial plan, and having a different country code. This is used by an auto attendant and when an Outlook
Voice Access subscriber searches and tries to call the user in the directory.
• This entry consists of a number prefix and n number of x characters (for example, 4420xxxxxxx).
• To determine the telephone number, UM will append the last n-digits from the telephone number that
is specified in the directory to the prefix that is specified.