Owner manual

Chapter 20: Paging Group Configuration
244 MaxCS 7.5 Administration Manual
To configure paging, select PBX > Paging Group Configuration.
Figure 141. Paging Group Configuration window
Setting Up a Paging Group
1. In the Paging Group configuration window, below the Group List, click the Add button.
2. Enter a number for the paging group.
3. Check the Global Group check box if you want this group to be visible to other gateways. Check Polycom
paging group if you want this group to be for Polycom phones. Click OK.
Figure 142. Paging group parameters
4. In the Group Information field, type in the following:
• First Name and Last Name of the paging group, each with a maximum of 32 characters.
• Password for the paging group. The default is the system password set on the Number Plan tab of the
System Configuration window.
• Description for the paging group.