Owner manual

Outgoing Call Blocking
MaxCS 7.5 Administration Manual 157
• Non Workdays
Within each of these three time slots, you have the following routing options for incoming calls:
• Route to an extension selected in the list
• Route to an auto attendant number selected in the list
• Route to a Line Park line selected in the list (see “Line Park Configuration” on page 249 for more detail)
• Route to the operator
Web IP Calls
For web IP calls, you can set routing for the three time periods defined in the System Configuration window,
Business Hours tab (
“Setting Business Hours” on page 51):
• During Business Hours
• Outside Business Hours
• Non Workdays
Within each of these three time slots, you have the following routing options for incoming calls:
• Route to an extension selected in the list
• Route to an auto attendant number selected in the list
• Route to the operator
Outgoing Call Blocking
To set outgoing call blocking for a trunk, select the trunk in the General tab, then click the Out Call Blocking
tab in the Trunk Configuration window.
Figure 101. Trunk Configuration, Out Call Blocking tab
If you select Trunk allowed for Outside Calls at Any Time, call restrictions set in System Configuration,
Outcall Routing, and Extension Configuration still apply to calls made on the trunk.
If you select Outside Calls Allowed According to The Following Schedules, you can then use the Schedule
1, 2, and 3 options to set up to three different time periods during which calls are allowed. You can use Apply
to to apply the settings to multiple trunks.