Owner manual

MaxCS 7.5 Administration Manual 109

C HAPTER

Board Configuration

This chapter shows how to configure AltiGen telephony boards:

• Triton Resource Board: see Using the Triton Resource Board

• Triton 30-Party Conference Board: see “Using the Triton MeetMe Conference Board” on page 111

• Triton Analog Station Board: see “Configuring the Triton Analog Station Board” on page 111

• Triton Analog Trunk LS/GS and LS Boards: see “Configuring the Triton Analog Trunk LS/GS and LS

Boards” on page 112

• Triton VoIP Board: see “Configuring the Triton VoIP Board” on page 112

• Triton T1/E1 Boards: see “Configuring the Triton T1/E1 Board” on page 113

• Virtual Board SIP: see “Configuring Virtual Board SIPSP” on page 125

• Virtual Board HMCP: see “Configuring Virtual Board HMCP” on page 128

• MAX1000/2000 Board: see “Configuring the MAX1000/2000 Board” on page 134

• Virtual MobileExtSP Board: see “Configuring the Virtual MobileExtSP Board” on page 136

For information on how to install AltiGen boards, refer to the Quick Installation Guide provided with every

board package.

Configuring Boards

Board attributes and functions are accessible from the Boards window.

Figure 57. Boards window

Double-click the board you want to configure, and a Board Configuration window opens, similar to the

following figure.