Owner manual

Chapter 8: Multilingual Configuration
96 MaxCS 7.5 Administration Manual
All feature codes are enabled, by default. The default feature profile name is “0-System.”
Lastly, the extension user must have a feature profile assigned to him that includes #12. This is done on the
Extension Configuration > General tab.
To assign feature code #12 to an extension,
1. On the PBX > Extension Configuration > General tab, select the extension.
2. In the “Personal Information” panel of the General tab, assign a Feature Profile that includes #12.
Using DNIS to Set the Language
If your company has multiple phone numbers, you can configure MaxCS 7.5 to direct a caller to prompts in a
selected language based on the phone number the caller has dialed.
To direct specified DNIS calls to a selected-language AA or extension,
1. Select PBX > In Call Routing Configuration > DNIS Routing tab .
2. Click the Add button to add a number.
3. Select where you want to route callers who have dialed that number.
4. Select the appropriate language from the Language Setting list.
5. Click Apply.