Specifications

30 MaxAgent Manual
Note: If user data is written to an internal call, the content is saved as a
call memo but cannot be carried with the call.
You may transfer calls in the following ways:
Dragging—Drag and drop the call (either while it’s ringing or connected)
onto the target number on the Directory, Speed Dial, Contacts, or
Monitor tabbed pages.
Dialing—While connected to a call, in the dialing field enter the target
number you want to transfer to, then click the Transfer button.
Clicking— If the target number is on the Directory, Speed Dial,
Contacts, or Monitor tab, click it. Then click Transfer.
You’re asked to confirm the transfer by clicking the Yes button in a
confirmation dialog box.
You can click Yes before the party answers to do a blind transfer, or you
can wait for the person to answer and then confirm or cancel the transfer.
At any time before or after the person you’re transferring to answers
the phone, you can cancel the transfer by clicking the No button or by
closing the dialog box.
If the transfer is canceled, MaxAgent reconnects the call to your
extension. The call is also reconnected if the third party doesn’t
answer.
Displaying a Note on the IP Phone LCD
If you want the note you type in the User Data field of the call to be
displayed on the IP phone LCD of the person receiving the call, do the
following:
In the Call Comment field of the User Data dialog box, enter DISP= and
follow that with your text (for example, DISP=new customer). DISP
(for “display”) is case-sensitive.